{"id":76095,"date":"2025-08-17T23:14:14","date_gmt":"2025-08-17T23:14:14","guid":{"rendered":"https:\/\/www.newsbeep.com\/au\/76095\/"},"modified":"2025-08-17T23:14:14","modified_gmt":"2025-08-17T23:14:14","slug":"i-saved-nearly-1000-when-i-stopped-renting-my-router-from-xfinity","status":"publish","type":"post","link":"https:\/\/www.newsbeep.com\/au\/76095\/","title":{"rendered":"I Saved Nearly $1,000 When I Stopped Renting My Router From Xfinity"},"content":{"rendered":"

I like to think of myself as an expert when it comes to broadband — after all, I’ve been writing about it for well over 6 years. Yet, despite my expertise, I have carried around a shameful secret: I rented a Wi-Fi router<\/a> from Xfinity<\/a> for years. I know, I know. I’ve always advised CNET readers to purchase their equipment, but my rented modem and router worked fine. That being said, I did know in the back of my mind, I was wasting money. <\/p>\n

For most people, a monthly charge of $15 for internet equipment doesn’t seem too bad when you’re first signing up for internet<\/a>. In fact, it seems the smart thing to do to avoid the stress of purchasing your own router and keeping it in good condition over the years. But the reality is that, after a few years of paying that monthly fee, it starts to add up — and you’ll have wasted hundreds of dollars on equipment that you could have purchased yourself.<\/p>\n

As I reviewed my old bills, I discovered that I spent a staggering $873 on Xfinity’s equipment fees over the last six years. Not only was I shocked, it gave me the kick in the right direction. I went ahead and bought my own router and modem<\/a>.<\/p>\n

As much as I appreciated my Xfinity equipment, owning your own gear<\/a> is the superior choice. For one thing, you’ll see significant performance improvements: My upload speeds skyrocketed by over 2,000%. Better yet, investing in your own equipment typically pays for itself within one to two years, making it well worth the investment.<\/p>\n

The average internet bill in the U.S. is $78 per month<\/a>, excluding extra taxes and fees found on your ISP’s broadband label<\/a>. While some charges are necessary, equipment rental fees aren’t and again, we advise you to purchase and manage your gear. Also, depending on your circumstances, you may be able to take advantage of any low-income discounts available in your state<\/a> if you qualify. <\/p>\n

For more information on making the switch from rented equipment to purchasing equipment of your own, check out our guide below.<\/p>\n

How to choose the right modem and router<\/p>\n

The best internet is the internet you never notice, and I can’t remember the last time my connection went out or I saw a buffering wheel in my home. And this is all with a device from 2017 that Xfinity describes as an “old Wireless Gateway with limited speeds and functionality.”\u00a0<\/p>\n

This goes to show how much the type of internet user you are has to do with what kind of equipment you need. I live in a 750-square-foot apartment, and my internet needs are mostly limited to video calls and TV streaming. If you live in a larger home with multiple floors, the same router likely won’t cut it. Similarly, activities like online gaming hinge on split-second reactions. If this instantaneous responsiveness is important to you, it’s probably worth investing in a gaming router<\/a> that minimizes lag.\u00a0<\/p>\n

Wi-Fi routers run the gamut from entry-level models like the TP-Link AC1200 for $30<\/a> to ultra-advanced mesh systems like the Netgear Orbi 970 Series for $1,500<\/a>. To test each Wi-Fi router, CNET runs three speed tests in five different rooms in our testing facility, logging results for download speed, upload speed and latency. That process is repeated six times, accounting for variations in network performance at different times of the day.<\/p>\n

\"wi-fi-6-routers-gigabit-speed-test-results.png\" Ry Crist\/CNET<\/p>\n

After consulting our picks for the best Wi-Fi routers<\/a>, I decided to go with a budget pick: the TP-Link Archer AX21<\/a>, of which my former CNET colleague and router connoisseur Ry Crist wrote, “It’s nothing fancy, but it offered near flawless performance for small- to medium-size homes in our tests, and it’s a cinch to setup.” I get only 200Mbps through my Xfinity plan, so the 700Mbps speed the TP-Link hits at close range is more than enough juice and only cost $85 when I bought it. (Several government agencies have since opened investigations<\/a> into TP-Link for ties to Chinese cyberattacks. But I don’t have any plans to replace my TP-Link router just yet<\/a>.)<\/p>\n

\"Hitron-CODA-DOCSIS-3.1-Modem\" <\/p>\n

A cable modem like the Hitron CODA connects your home to your internet provider through a coaxial cable.<\/p>\n

HitronDo you need to buy a modem?<\/p>\n

Depending on your internet connection, you may need to purchase a cable modem in addition to your router. Some ISPs, like Spectrum<\/a>, include the modem for free but charge extra for a router.\u00a0<\/p>\n

The main thing to look for in a modem is compatibility. Your internet provider will have a page on their website that lists all the models that it works with, and you shouldn’t stray from this. You may also have a choice between DOCSIS 3.0 and 3.1<\/a>; the newer standard provides faster speeds, but DOCSIS 3.1 modems are typically more expensive. (Note: Although some ISPs have DOCSIS 4.0 modems available to rent, most are not yet widely available for purchase.) Other things to consider are the modem’s speed limits — make sure they’re equal to or above your internet plan — and the number of Ethernet<\/a> ports.\u00a0<\/p>\n

Xfinity doesn’t provide a free modem, so I had to buy one in addition to a Wi-Fi router. I opted for the Hitron CODA Modem<\/a> — a DOCSIS 3.1 model that’s one of the cheapest Xfinity-compatible models I could find for $100 at the time I purchased it. It supports download speeds up to only 867Mbps, but that’s still far more than my Xfinity plan.<\/p>\n

How to set up your new modem and router<\/p>\n

Ordering the equipment is the easy part; the ordeal of setting up third-party equipment is what keeps many customers on the hook for years. The process is largely the same whether you’re starting service fresh with a new provider or swapping out old equipment. Here’s everything you’ll need to do.\u00a0<\/p>\n

1. Activate your new modem with your ISP<\/p>\n

The modem is the piece of equipment that brings the internet to your home through a coaxial cable connected to your internet provider’s network. Before it can work, ISPs need to tie your specific modem to your account. If you’re replacing old equipment, they will also turn this off as they activate the new modem. ISPs do this by logging your MAC (media access control) number, which can be found on the bottom of the modem.<\/p>\n

You can typically do this through your internet provider’s app, in a live chat or by calling a customer service number.\u00a0<\/p>\n

2. Connect the coax cable to your modem<\/p>\n

After your new modem’s MAC address is registered with your ISP, you’ll be prompted to connect your modem to the cable outlet in your wall and plug it into a power outlet. You may have to wait up to 5 minutes, and your modem’s lights will tell you when it’s receiving the internet signal. Once the indicator lights are on, you’re ready to set up your wireless router.<\/p>\n

\"tp <\/p>\n

This TP-Link router offers wireless access to your modem’s connection with the web (hence the antennas).<\/p>\n

Ry Crist\/CNET3. Set up your Wi-Fi router<\/p>\n

Each Wi-Fi router has its own setup process, so you’ll want to follow the instructions provided. In the case of the TP-Link Archer AX21, that meant unplugging the modem’s power, connecting the modem to the router’s WAN port via an Ethernet cable<\/a>, powering on the modem and then plugging the router into a power outlet. From there, I set up my new network through the TP-Link app.<\/p>\n

That’s the short version. There’s a lot more to consider when setting up a wireless router, including choosing the optimal location<\/a>, setting up parental controls<\/a> and protecting your privacy<\/a>. For my purposes, though, I was ready to start testing out my new internet connection.\u00a0<\/p>\n

Speed comparison: Which setup is fastest?<\/p>\n

I wanted to see how my new modem and router would compare with my old equipment, so I ran speed tests before and after I was connected: one from my desk next to the router and one from the furthest corner of my apartment (regrettably, the bathroom).\u00a0<\/p>\n

My old modem and router returned 164\/5Mbps speeds from my desk and 143\/5Mbps from the bathroom — not bad for an internet plan that advertises 200\/10Mbps speeds. But the speeds with my new equipment were eye-popping: 237\/118Mbps at both my desk and my bathroom. I didn’t just save money by purchasing my own equipment — I’m actually getting a significant speed boost, too.<\/p>\n

\"router-speed-test\" Joe Supan \/ CNET<\/p>\n

I have no idea why my new equipment picked up 10 times the upload speeds of my old one. I subscribe to Xfinity’s Connect More plan, which is supposed to get only 10Mbps upload speeds. In 2022, Xfinity announced that it was increasing upload speeds on my plan to 100Mbps — but only for customers who pay for its $25-per-month xFi Complete equipment. Apparently, I’m reaping those same benefits with my new modem and router. My best guess is that the upgrade\u00a0from a DOCSIS 3.0 to a 3.1 modem is the main reason for the jump in upload speeds.<\/p>\n

How to save yourself some headaches<\/p>\n

I eventually got my modem and router set up properly, but I made plenty of mistakes along the way. Here’s what I would do differently:<\/p>\n

Buy your modem and router on day one. Moving is a pain, and no one wants to make their to-do list even longer, but this is one task where the extra effort pays off (nearly a thousand dollars in my case). A technician<\/a> may need to visit your house to set up your internet, so it’s best to have your modem and router ready in case of any issues.\u00a0Use your ISP’s list of compatible modems. Routers aren’t tied to specific providers, but if you have to purchase your own modem, you’ll need to make sure that it works with your ISP. Don’t cut corners here. I searched Amazon for a modem that claimed compatibility with Xfinity and ended up having to return it a week later, after several hours of phone calls. Your provider should have a page that lists all the modems that it works with — don’t stray from this.Pay for only the speed you need. Internet equipment is expensive, and there’s no reason to pay for a modem certified for 2,000 Mbps when you’re getting only 200 Mbps with your plan. The same goes for routers — you don’t need to pay top dollar for a gaming router with exceptional latency if you’re just streaming TV and scrolling the internet.\u00a0My final thoughts<\/p>\n

Setting up a new modem and router is not fun, but it’s absolutely worth it. My internet speeds have dramatically improved, and I’m paying significantly less for them. I’m saving $15 per month on equipment, and somewhere along the line, an Xfinity agent bumped my plan price down for the following year. My monthly bill went from $78.54 to $50. That’s far more than I expected to save, and my new equipment paid for itself within the first six months. My only regret is that I didn’t make the leap sooner.\u00a0<\/p>\n","protected":false},"excerpt":{"rendered":"I like to think of myself as an expert when it comes to broadband — after all, I’ve…\n","protected":false},"author":2,"featured_media":76096,"comment_status":"","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[18],"tags":[64,63,237,105],"class_list":{"0":"post-76095","1":"post","2":"type-post","3":"status-publish","4":"format-standard","5":"has-post-thumbnail","7":"category-internet","8":"tag-au","9":"tag-australia","10":"tag-internet","11":"tag-technology"},"_links":{"self":[{"href":"https:\/\/www.newsbeep.com\/au\/wp-json\/wp\/v2\/posts\/76095","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.newsbeep.com\/au\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.newsbeep.com\/au\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.newsbeep.com\/au\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/www.newsbeep.com\/au\/wp-json\/wp\/v2\/comments?post=76095"}],"version-history":[{"count":0,"href":"https:\/\/www.newsbeep.com\/au\/wp-json\/wp\/v2\/posts\/76095\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.newsbeep.com\/au\/wp-json\/wp\/v2\/media\/76096"}],"wp:attachment":[{"href":"https:\/\/www.newsbeep.com\/au\/wp-json\/wp\/v2\/media?parent=76095"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.newsbeep.com\/au\/wp-json\/wp\/v2\/categories?post=76095"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.newsbeep.com\/au\/wp-json\/wp\/v2\/tags?post=76095"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}