Peng, C. et al. Weakly space-confined all-inorganic perovskites for light-emitting diodes. Nature 643, 96–103 (2025).
Kong, L. et al. Fabrication of red-emitting perovskite LEDs by stabilizing their octahedral structure. Nature 631, 73–79 (2024).
Li, M. et al. Acceleration of radiative recombination for efficient perovskite LEDs. Nature 630, 631–635 (2024).
Xiong, W. et al. Controllable p- and n-type behaviours in emissive perovskite semiconductors. Nature 633, 344–350 (2024).
Sun, Y. et al. Bright and stable perovskite light-emitting diodes in the near-infrared range. Nature 615, 830–835 (2023).
Jiang, Y. et al. Synthesis-on-substrate of quantum dot solids. Nature 612, 679–684 (2022).
Ding, S. et al. Phase dimensions resolving of efficient and stable perovskite light-emitting diodes at high brightness. Nat. Photon. 18, 363–370 (2024).
Zeng, J. et al. Switchable interfacial reaction enables bright and stable deep-red perovskite light-emitting diodes. Nat. Photon. 18, 325–333 (2024).
Chu, Z. et al. Blue light-emitting diodes based on quasi-two-dimensional perovskite with efficient charge injection and optimized phase distribution via an alkali metal salt. Nat. Electron. 6, 360–369 (2023).
Ma, D. et al. Distribution control enables efficient reduced-dimensional perovskite LEDs. Nature 599, 594–598 (2021).
Qin, C. et al. Triplet management for efficient perovskite light-emitting diodes. Nat. Photon. 14, 70–75 (2020).
Zhao, B. et al. High-efficiency perovskite–polymer bulk heterostructure light-emitting diodes. Nat. Photon. 12, 783–789 (2018).
Wang, N. et al. Perovskite light-emitting diodes based on solution-processed self-organized multiple quantum wells. Nat. Photon. 10, 699–704 (2016).
Zou, W. et al. Minimising efficiency roll-off in high-brightness perovskite light-emitting diodes. Nat. Commun. 9, 608 (2018).
Sun, G. et al. Exciton dissociation and long-lived delayed components in high-efficiency quasi-two-dimensional green perovskite light-emitting diodes. Laser Photonics Rev. 19, 2400732 (2024).
Jiang, Y. et al. Reducing the impact of Auger recombination in quasi-2D perovskite light-emitting diodes. Nat. Commun. 12, 336 (2021).
Guo, Z. et al. Promoting energy transfer via manipulation of crystallization kinetics of quasi-2D perovskites for efficient green light-emitting diodes. Adv. Mater. 33, 2102246 (2021).
Sun, C. et al. High-performance large-area quasi-2D perovskite light-emitting diodes. Nat. Commun. 12, 2207 (2021).
Gao, Y. et al. High-performance perovskite light-emitting diodes enabled by passivating defect and constructing dual energy-transfer pathway through functional perovskite nanocrystals. Adv. Mater. 34, 2207445 (2022).
Zhang, Q. et al. Cation engineering enables sequentially ordered growth of 3D and 2D perovskites for high-efficiency perovskite light-emitting diodes. Adv. Funct. Mater. 35, 2502488 (2025).
Qi, H. et al. Homogenizing energy landscape for efficient and spectrally stable blue perovskite light-emitting diodes. Adv. Mater. 36, 2409319 (2024).
Azmi, R. et al. Damp heat-stable perovskite solar cells with tailored-dimensionality 2D/3D heterojunctions. Science 376, 73–77 (2022).
Heo, S. et al. Dimensionally engineered perovskite heterostructure for photovoltaic and optoelectronic applications. Adv. Energy Mater. 9, 1902470 (2019).
Jiang, N. et al. 2D/3D heterojunction perovskite light-emitting diodes with tunable ultrapure blue emissions. Nano Energy 97, 107181 (2022).
Azmi, R. et al. Double-side 2D/3D heterojunctions for inverted perovskite solar cells. Nature 628, 93–98 (2024).
Min, H. et al. Spin coating epitaxial heterodimensional tin perovskites for light-emitting diodes. Nat. Nanotechnol. 19, 632–637 (2024).
Li, D. et al. Spontaneous formation of upper gradient 2D structure for efficient and stable quasi-2D perovskites. Adv. Mater. 33, 2101823 (2021).
Sidhik, S. et al. Deterministic fabrication of 3D/2D perovskite bilayer stacks for durable and efficient solar cells. Science 377, 1425–1430 (2022).
Proppe, A. H. et al. Multication perovskite 2D/3D interfaces form via progressive dimensional reduction. Nat. Commun. 12, 3472 (2021).
Jang, Y. W. et al. Intact 2D/3D halide junction perovskite solar cells via solid-phase in-plane growth. Nat. Energy 6, 63–71 (2021).
Kim, S. G. et al. How antisolvent miscibility affects perovskite film wrinkling and photovoltaic properties. Nat. Commun. 12, 1554 (2021).
Datta, K. et al. Local halide heterogeneity drives surface wrinkling in mixed-halide wide-bandgap perovskites. Nat. Commun. 16, 1967 (2025).
Chen, W. et al. Overcoming the outcoupling limit of perovskite light-emitting diodes with artificially formed nanostructures. Adv. Mater. 34, 2207180 (2022).
Tong, J. et al. Synergistic potentiation between P3HT and PTAA enables blade-coated carbon-electrode perovskite solar cells with >21% outdoor and >35% indoor efficiencies. Chem. Eng. J. 501, 157577 (2024).
de Brito, E. B. et al. Improved properties of high molar mass poly(9-vinylcarbazole) and performance as a light emitter compared with the commercial PVK. Mater. Sci. Eng. B 286, 116020 (2022).
Yang, X. et al. Efficient green light-emitting diodes based on quasi-two-dimensional composition and phase engineered perovskite with surface passivation. Nat. Commun. 9, 570 (2018).
Yan, Y. et al. Implementing an intermittent spin-coating strategy to enable bottom-up crystallization in layered halide perovskites. Nat. Commun. 12, 6603 (2021).
Zhu, X. et al. Ecofriendly hydroxyalkyl cellulose additives for efficient and stable MAPbI3-based inverted perovskite solar cells. Energy Environ. Mater. 6, e12426 (2023).
Gu, H. et al. Phase-pure two-dimensional layered perovskite thin films. Nat. Rev. Mater. 8, 533–551 (2023).
Doherty, T. A. S. et al. Performance-limiting nanoscale trap clusters at grain junctions in halide perovskites. Nature 580, 360–366 (2020).
Macpherson, S. et al. Local nanoscale phase impurities are degradation sites in halide perovskites. Nature 607, 294–300 (2022).
Wei, Z. et al. Photoluminescence microscopy of optoelectronic materials. Nat. Rev. Methods Primers 5, 37 (2025).
Kim, J. S. et al. Ultra-bright, efficient and stable perovskite light-emitting diodes. Nature 611, 688–694 (2022).
Wang, H. et al. 2D capping layer passivation toward inorganic CsPbI3 perovskite minimodule. Adv. Funct. Mater. 35, 2423397 (2025).
Chen, P. et al. Bilayer 2D-3D perovskite heterostructures for efficient and stable solar cells. ACS Nano 18, 67–88 (2024).
Cao, Y. et al. Perovskite light-emitting diodes based on spontaneously formed submicrometre-scale structures. Nature 562, 249–253 (2018).
Liu, Z. et al. Perovskite light-emitting diodes with EQE exceeding 28% through a synergetic dual-additive strategy for defect passivation and nanostructure regulation. Adv. Mater. 33, 2103268 (2021).
Sun, S. Q. et al. Multidentate molecule anchoring halide perovskite surface and regulating crystallization kinetics toward efficient light-emitting diodes. Small 19, 2205336 (2022).
Bai, W. et al. Perovskite light-emitting diodes with an external quantum efficiency exceeding 30. Adv. Mater. 35, 2302283 (2023).
Han, B. et al. Green perovskite light-emitting diodes with 200 hours stability and 16% efficiency: cross-linking strategy and mechanism. Adv. Funct. Mater. 31, 2011003 (2021).
Jang, C. H. et al. Multifunctional conjugated molecular additives for highly efficient perovskite light-emitting diodes. Adv. Mater. 35, 2210511 (2023).
Sun, S. Q. et al. Enhancing light outcoupling efficiency via anisotropic low refractive index electron transporting materials for efficient perovskite light-emitting diodes. Adv. Mater. 36, 2400421 (2024).
Liu, M. et al. Suppression of temperature quenching in perovskite nanocrystals for efficient and thermally stable light-emitting diodes. Nat. Photon. 15, 379–385 (2021).
Ye, Y. et al. CsPbBr3 nanocrystals embedded glass enables highly stable and efficient light-emitting diodes. Chem. Eng. J. 445, 136867 (2022).
Yu, W. et al. Separating crystal growth from nucleation enables the in situ controllable synthesis of nanocrystals for efficient perovskite light-emitting diodes. Adv. Mater. 35, 2301114 (2023).
Gao, Y. et al. Microsecond-response perovskite light-emitting diodes for active-matrix displays. Nat. Electron. 7, 487–496 (2024).
Fang, T. et al. Perovskite QLED with an external quantum efficiency of over 21% by modulating electronic transport. Sci. Bull. 66, 36–43 (2021).
Zhang, X. et al. Stable perovskite quantum dots light-emitting diodes with efficiency exceeding 24%. Adv. Sci. 10, 2304696 (2023).
Zhang, J. et al. In-situ surface repair of FAPbBr3 quantum dots toward high-performance pure-green perovskite light-emitting diodes. Nano Lett. 24, 12196–12203 (2024).