{"id":651172,"date":"2026-05-06T08:37:09","date_gmt":"2026-05-06T08:37:09","guid":{"rendered":"https:\/\/www.newsbeep.com\/ca\/651172\/"},"modified":"2026-05-06T08:37:09","modified_gmt":"2026-05-06T08:37:09","slug":"fords-skunkworks-ev-development-center-behind-the-scenes","status":"publish","type":"post","link":"https:\/\/www.newsbeep.com\/ca\/651172\/","title":{"rendered":"Ford’s ‘Skunkworks’ EV Development Center: Behind The Scenes"},"content":{"rendered":"

Last October, Ford CEO Jim Farley was blunt about the challenge his company faces. With growing production capacity, advanced technology, and world-beating prices, Chinese automakers, he said, could \u201cput us all out of business<\/a>.\u201d<\/p>\n

The old way of building cars isn\u2019t going to get Ford out of this. The company knows this, which is why it set up a separate campus, free from Ford\u2019s bureaucracy and processes, to create its next generation of EVs.<\/p>\n

It\u2019s called the Ford Electric Vehicle Design Center (EVDC), and it\u2019s situated just outside of Long Beach Airport in Long Beach, California. Last week, I went inside on a group media tour to see how Ford is taking on this challenge.<\/p>\n

I learned a lot about how Ford is approaching the problem. But it\u2019s still too early to know if the company has the solution.\u00a0<\/p>\n

<\/p>\n

\"Ford<\/p>\n

<\/a><\/p>\n

39 <\/p>\n

\n Source: Ford <\/p>\n

How It\u2019s Different<\/p>\n

A key reason that EVs from Chinese automakers and upstarts like Tesla are cheaper is that they are ground-up, software-defined EVs. That means the company that makes the car controls all of the software in it, and designs it holistically to minimize the amount of wiring, computers, and suppliers required. That drastically reduces costs and shortens development times, as you don\u2019t need to have a constant back-and-forth with a deep roster of suppliers in order to make a minor change.<\/p>\n

Ford isn\u2019t built for that approach, or at least it wasn\u2019t. American, European, Japanese, and Korean automakers typically function more as project managers, coordinating a vast group of suppliers that actually write the software and design the advanced driver assistance systems (ADAS) that the automakers then integrate into a final product.<\/p>\n

Trying to nudge a team that works that way into becoming a full-fledged software-first team is not an easy task. As the Chinese automakers show, it\u2019s easier to start from scratch than it is to pivot a massive organization like Ford.<\/p>\n

So the company did the next best thing. It set up EVDC, where 350 employees work outside of the typical structure of Ford\u2019s headquarters in Dearborn, Michigan.\u00a0<\/p>\n

\"Ford<\/p>\n

Ford’s EV Development Center in Long Beach.<\/p>\n

Photo by: Ford<\/p>\n

\u201cWe\u2019re also able to collaborate with another\u2014about\u2014480 employees between Dearborn and Palo Alto that help us with program management, manufacturing, engineering, body engineering, and software,\u201d Andrew Reimer, senior director of vehicle integration and engineering at EVDC, said. \u201cWe collaborate every day.\u201d<\/p>\n

At EVDC itself, the teams that handle vehicle engineering, design, prototype production, field validation, software engineering, and manufacturing engineering all live under the same roof. The idea is to speed cross-domain collaboration, creating the sort of fast-failing, fast-adapting design process that you\u2019d see at BYD or Tesla. The latter comparison is no coincidence; Alan Clarke, Ford\u2019s vice president for advanced development projects and effective head of the EVDC, is a Tesla<\/a> vet that helped design the Model S<\/a>, Model 3<\/a>, Model Y<\/a>, and Cybertruck<\/a>.<\/p>\n

How It\u2019s Bringing \u2018China Speed\u2019 To The U.S.<\/p>\n

Under Clarke\u2019s stewardship, the advanced EV team has rethought how the company assembles vehicles. With its upcoming Universal Electric Vehicle (UEV) platform<\/a>, spearheaded by its planned $30,000 electric truck, the company is ditching the linear assembly line<\/a>. Instead, the front, rear, and floor modules of the vehicle will be assembled separately, then joined at the end.\u00a0<\/p>\n

\"Ford<\/p>\n

The first vehicle on the UEV platform will be a midsize electric truck. We don’t know what it will look like, but Ford has released this teaser.<\/p>\n

Photo by: Ford<\/p>\n

The result is that manufacturing workers won\u2019t have to constantly lean into open doors to install key interior components. Instead, the seats, center console, and other accoutrement will be installed right on top of the battery. The front clip, where the power electronics, HVAC system, cooling system, and front motor live, gets built separately, as does the rear structure. The whole system means less bending, twisting, and maneuvering around obstacles for line workers, Ford claims, saving time and easing the load on the worker. It should lead to faster production times, which saves money.<\/p>\n

\u201cWe\u2019ve now shrunk the time from when we start to the end, which is going to increase the ability for quality loops,\u201d Ford Advanced Manufacturing Program Chief Kevin Young said. Essentially, as the process gets shorter, it gets easier to check and improve the quality process, in theory.<\/p>\n

The other part of that is bringing all of the key teams under one roof, and limiting how much the company is relying on suppliers to problem-solve during the design phase. Because all of the teams are in the same building\u2014which isn\u2019t true in Dearborn\u2014Ford employees repeatedly claimed throughout the tour that their issue-finding and remediation process was speeding up.\u00a0<\/p>\n

\u201cWhat we\u2019re really trying to do is develop the best possible product in the most cost efficient fashion,\u201d Scott Anderson, a senior manager on the seating team, told reporters. \u201cAnd to help those processes come together, what we\u2019re trying to do here at EVDC is develop the mindset of fast iteration. You know, fail fast, learn, repeat, and hopefully at the end of the day you have a much better product coming to market.\u201d\u00a0<\/p>\n

\"Ford<\/p>\n

Ford’s on-site textile shop is limiting material waste and increasing the speed of iteration, Ford claims.<\/p>\n

Photo by: Ford<\/p>\n

Anderson said that in his own process of developing seating designs that use materials efficiently, the ability to iterate in-house without needing supplier input at every step has drastically reduced iteration time. He claimed that a design review and improvement process that would take 12 weeks using the Dearborn method can now be done in 2-3 weeks at EVDC.<\/p>\n

Promising, But Incomplete<\/p>\n

As we moved into the second building of the tour, however, one tough truth was hard to ignore. The hot- and cold-weather full vehicle dynamometer was still being constructed. The team that handles battery cell validation and design was preparing to move out of its temporary dwellings into a more permanent home. Large plastic sheets blocked off sections of the facility, and the equipment and detritus of active construction abounded.<\/p>\n

For all of Farley\u2019s mentions of the \u201cskunkworks\u201d team on earnings calls dating back years, and all of Ford\u2019s claims about how the facility was accelerating development, the company admitted that most of the UEV truck was developed outside of these walls.\u00a0<\/p>\n

\"Ford<\/p>\n

Many of Ford’s engineers are still working in temporary locations, as the company builds out its EVDC.<\/p>\n

Photo by: Ford<\/p>\n

\u201cWith the midsize pickup truck,\u201d Clarke said, referring to the first model on the UEV platform, \u201cwe\u2019ve had to use outside test labs. We\u2019ve had to use all the labs in Dearborn. We flexed every muscle possible and pulled every resource Ford has to offer to develop the mid-size pickup truck. What you saw today was about continuing that, but being able to do it at a higher velocity with the team that\u2019s here.\u201d<\/p>\n

Simply put: This facility isn\u2019t really for Ford\u2019s first software-defined EV. It\u2019s for its second, third, and tenth. It\u2019s also a recognition that, for all of its boldness in rethinking the model, Ford is starting from behind companies like BYD<\/a> and Geely<\/a>, by Farley\u2019s own admission. It has invested millions in reworking its operations, but the payoff from that investment hasn\u2019t arrived yet.\u00a0<\/p>\n

What Happens Next<\/p>\n

Throughout the tour, Ford representatives repeatedly claimed that the new facilities and new processes will enable it to innovate faster, reduce costs, improve efficiency, and create a world-beating EV. I found them convincing, and it was clear that Ford\u2019s approach at EVDC is considerably leaner and more modern than traditional vehicle design at a legacy automaker.<\/p>\n

But consumers don\u2019t buy processes. They buy products. Because I still haven\u2019t seen the final product, I can\u2019t test any of Ford\u2019s claims. On logic and on merit, it seems like a smarter, faster way to build a car. To actually prove it out, Ford has to build the car.\u00a0<\/p>\n

\"Ford<\/p>\n

Alan Clarke, a Tesla vet, leads Ford’s advanced EV team.<\/p>\n

Photo by: Ford<\/p>\n

The gears are already in motion. Ford representatives said that hundreds of prototypes were in production as we spoke, and that the Louisville, Kentucky factory where the midsize truck will be built is already under renovation<\/a>. The company is clearly serious about this, and is openly rethinking most of its core assumptions on car-building. It\u2019s not standing still.<\/p>\n

But will the end product of this venture truly be an EV with universal appeal? Ford seems confident that the answer is yes. The rest of us will have to wait until next year to judge for ourselves.<\/p>\n

Contact the author: Mack.Hogan@insideevs.com<\/a><\/p>\n

\n

\t\tWe want your opinion!\n\t<\/p>\n

What would you like to see on Insideevs.com?<\/p>\n

\t\t
\n\t\t\tTake our 3 minute survey.\t\t<\/a><\/p>\n

– The InsideEVs team<\/p>\n","protected":false},"excerpt":{"rendered":"Last October, Ford CEO Jim Farley was blunt about the challenge his company faces. With growing production capacity,…\n","protected":false},"author":2,"featured_media":651173,"comment_status":"","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[5],"tags":[241800,2209,58672,45,91194,49,48,175803,64579,11944,241796,5105,10221,175633,20654,241799,41199,55105,5028,241797,241798],"class_list":["post-651172","post","type-post","status-publish","format-standard","has-post-thumbnail","category-business","tag-alan-clarke","tag-analysis","tag-b2c","tag-business","tag-byd","tag-ca","tag-canada","tag-chinese-automakers","tag-dearborn","tag-electric-vehicle","tag-evdc","tag-features","tag-ford","tag-geely","tag-long-beach","tag-midsize-electric-truck","tag-palo-alto","tag-pickup","tag-tesla","tag-uev-platform","tag-universal-electric-vehicle"],"_links":{"self":[{"href":"https:\/\/www.newsbeep.com\/ca\/wp-json\/wp\/v2\/posts\/651172","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.newsbeep.com\/ca\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.newsbeep.com\/ca\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.newsbeep.com\/ca\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/www.newsbeep.com\/ca\/wp-json\/wp\/v2\/comments?post=651172"}],"version-history":[{"count":0,"href":"https:\/\/www.newsbeep.com\/ca\/wp-json\/wp\/v2\/posts\/651172\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.newsbeep.com\/ca\/wp-json\/wp\/v2\/media\/651173"}],"wp:attachment":[{"href":"https:\/\/www.newsbeep.com\/ca\/wp-json\/wp\/v2\/media?parent=651172"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.newsbeep.com\/ca\/wp-json\/wp\/v2\/categories?post=651172"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.newsbeep.com\/ca\/wp-json\/wp\/v2\/tags?post=651172"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}