{"id":804453,"date":"2026-07-15T23:26:16","date_gmt":"2026-07-15T23:26:16","guid":{"rendered":"https:\/\/www.newsbeep.com\/ca\/804453\/"},"modified":"2026-07-15T23:26:16","modified_gmt":"2026-07-15T23:26:16","slug":"full-steam-ahead-nasa-ramps-up-prep-for-artemis-iii-astronaut-launch-in-2027","status":"publish","type":"post","link":"https:\/\/www.newsbeep.com\/ca\/804453\/","title":{"rendered":"‘Full steam ahead’: NASA ramps up prep for Artemis III astronaut launch in 2027"},"content":{"rendered":"

NASA is picking up the pace on its Artemis III mission preparations, pressing forward on multiple fronts to assemble launch vehicle hardware and beginning routine simulations inside Artemis mission control.<\/p>\n

The agency is “full steam ahead,” according to a July 13 NASA update<\/a>. Across Kennedy Space Center<\/a> (KSC) in Florida, components of Artemis III’s Space Launch System<\/a> (SLS) rocket are coming together, undergoing tests and awaiting transportation for final integration ahead of next year’s launch. NASA<\/a> is targeting mid-to-late 2027 for Artemis III, which will launch four astronauts into low Earth orbit (LEO) aboard the Orion spacecraft<\/a>. It will be the second crewed mission of NASA’s Artemis program<\/a>, which aims to establish a permanent human presence on the moon<\/a>.<\/p>\n

<\/p>\n

Artemis III will be a critical stepping stone in NASA’s lunar landing architecture, despite the mission not actually flying to the moon. Instead, SLS will launch Orion and its four-person crew into LEO for rendezvous and docking operations with the program’s two commercial lunar lander vehicles: SpaceX<\/a>‘s Starship<\/a> and Blue Origin<\/a>‘s Blue Moon spacecraft.<\/p>\n

With the completion of the massively successful Artemis II<\/a> mission that flew astronauts around the moon in April and the second half of 2026 beginning to count down, NASA has shifted into full gear to complete assembly and testing of the hardware that will launch Artemis III<\/a>.<\/p>\n

Several components for the mission’s SLS rocket have arrived in the Vehicle Assembly Building (VAB) at KSC. The SLS core stage was delivered at the end of April<\/a>, and it was connected with the rocket’s engine block section in May. The first two of the core stage’s four RS-25 engines arrived in June and will be installed on the SLS engine block once the remaining two are delivered, after which NASA plans to begin integration with the mobile launch platform (MLP) and launch operations tests. A temporary weather cap<\/a> was also delivered in June, which will protect the stage when NASA transports it to the launch pad for tests before the full vehicle is stacked.<\/p>\n

You may like<\/p>\n

The bottom segments of both SLS solid rocket boosters (SRBs) were delivered over the last week<\/a>, and they have been mounted on the MLP, according to NASA’s update. The upper SRB segments arrived at KSC via train in June and will undergo inspection and testing before the twin boosters are fully stacked.<\/p>\n

\"Artemis<\/p>\n

Per NASA: Artemis launch director Charlie Blackwell-Thompson participates in the launch countdown simulation on July 2, 2026, in Firing Room 1 of the Launch Control Center.<\/p>\n

Image credit: NASA\/Chad Siwik<\/p>\n

\"Employees<\/p>\n

Per NASA: Employees pose for a photograph following work inside the VAB to secure the left-hand aft assembly solid rocket booster segment to the mobile launcher at the VAB on July 9, 2026.<\/p>\n

Image credit: NASA\/Ben Smegelsky<\/p>\n

\"The<\/p>\n

Per NASA: The left-hand and right-hand aft assembly solid rocket booster segments for NASA\u2019s Artemis III SLS (Space Launch System) rocket are secured to the mobile launcher at the agency\u2019s Vehicle Assembly Building at NASA\u2019s Kennedy Space Center in Florida on July 11, 2026. <\/p>\n

Image credit: NASA\/Frank Michaux<\/p>\n

\"Artemis<\/p>\n

Per NASA: Artemis III astronauts Randy Bresnik and Andre Douglas visit the Multi-Payload Processing Facility at NASA’s Kennedy Space Center on July 10, 2026.<\/p>\n

Image credit: NASA\/Cory Huston<\/p>\n

Inside KSC’s Neil Armstrong Operations and Checkout Building, the Artemis III Orion is making significant progress \u2014 engineers have now finished installation of the spacecraft’s heat shield.<\/p>\n

\"Space\"<\/p>\n

Artemis III will be the first Orion mission to use an upgraded heat shield, featuring design improvements gleaned from analysis of unexpected wear on the heat shield flown on Artemis I<\/a>. Orion’s service module is also currently inside the Operations and Checkout Building and recently completed acoustic testing. Both the service module and Orion capsule are now being prepared for joining and eventual transportation to the VAB for stacking.<\/p>\n

The pieces for Artemis III are coming together at @NASAKennedy.The twin solid rocket boosters? They\u2019re getting stacked.The launch team? They\u2019re simulating the countdown.The heat shield? It\u2019s now attached to the Orion spacecraft.Full steam ahead for Artemis III. pic.twitter.com\/2f92kv6HEiJuly 13, 2026<\/a><\/p>\n

On the personnel side of things, Artemis III team members at KSC have begun monthly launch simulation tests to hone procedures for SLS propellant loading, terminal count operations (the final 10 minutes prior to liftoff) and launch day operations. Those tests will continue regularly leading up to Artemis III’s launch next year, according to NASA.<\/p>\n

As teams across NASA are busy readying all the pieces for Artemis III, others are looking ahead to the program’s first lunar landing, planned for Artemis IV. That mission, scheduled for late 2028, will deliver a crew of astronauts to the surface of the moon for the first time since 1972. The SLS that will get them there is also coming together piece by piece.<\/p>\n

The liquid oxygen (LOX) tank for the Artemis IV SLS core stage was recently relocated<\/a> within NASA’s Michoud Assembly Facility in New Orleans, positioning the tank for testing as it enters its next phase of production.<\/p>\n