Laser light can lift and steer tiny, patterned chips in three different dimensions, converting light itself into both thrust and lift, according to a new study.

The research moves light-driven propulsion beyond a narrow lab niche, pointing toward a future where machines travel without fuel or physical contact.

Movement begins underwater

EarthSnap

Inside a water-filled cell, researchers observed as free-floating metajets moved sideways and upward as laser light struck their patterned surfaces.

Working at Texas A&M University (TAMU), Dr. Shoufeng Lan and his team documented that motion as the devices redirected the beam and recoiled in response.

The same tiny structures did not merely drift along the light’s path, but moved against the bent beam while also rising through the fluid.

That controlled motion established the phenomenon clearly enough to shift focus to how the surface itself converts light into force.

Physics behind the push

When the patterned metasurface, an ultrathin light-shaping layer, bent the beam, changing photon momentum made the device recoil.

This was followed by the same action-and-reaction rule, except light supplied the shove instead of exhaust.

Lan’s group called the engineered reaction a metaphotonic force – one that could point sideways, upward, or both.

Using the force model, the experiments had a clear logic, because the motion followed where the redirected light went after leaving the surface.

Fabrication sets direction

Each device used silicon nanopillars, tiny silicon columns, arranged so neighboring elements delayed the wave by different amounts.

Changing pillar size altered that timing, which set the beam’s exit angle and the force direction.

One early version steered 58% of the incoming light into the target path, enough for clear motion measurements.

This fabrication control did not end headaches for the scientists but did show the geometry was doing the work instead of creating stray heating.

A clear pattern emerges

Five repeated runs under the same laser conditions showed the same pattern – steady travel in one direction, little sideways drift, and upward rise.

As the laser turned on, the device sped upward and then leveled off at the chamber’s ceiling.

Video frames taken every five seconds showed the object moving opposite to the bent light, just as predicted.

The measurements mattered because they tied the theory to a visible, proven path, more than just a calculation on a screen.

Shifting complexity to the object

Earlier optical micromachines usually depended on shaped or steered beams, a 2020 nanomotor study made clear.

Here, the beam stayed simple while the patterned object handled much of the steering.

Moving control into the object removed one bottleneck, since redesigning a device can be easier than rebuilding laser hardware around a moving target.

The approach also looked like a platform, not just a one-off trick in one setup.

Tradeoffs shape motion

Fewer pillars in each repeating pattern pushed light farther sideways, increasing horizontal thrust but reducing lift.

More pillars did the reverse, easing the sideways shove while strengthening the vertical force.

Because both motions came from the same light, tuning one direction changed the other. That tradeoff made propulsion design a balancing act, not a simple race for speed or maximum lift.

Scaling the idea upward

The striking part was not the device’s size, but the rule behind it: more light meant more force, even at scales smaller than a human hair.

“The optical force scales with incident power and is not fundamentally dependent on the size of the metajet,” the researchers wrote.

That logic quickly turns attention to Alpha Centauri, the nearest star system to the Sun.

Directed-energy proposals have already sketched roughly 20-year trips for laser sails weighing a fraction of an ounce, even though this test stayed far smaller.

Barriers to real-world use

Gravity still complicated the experiment, so the team used liquid to soften its effect, partly offset weight, and clarify the motion.

Outside that setup, real systems must manage beam stability, heating, alignment, and materials that survive intense light over long distances.

None of those hurdles erased the data, but tests remain more difficulty regarding future spacecraft, especially without lab supports.

Microgravity tests, higher powers, and tougher materials will matter most in the upcoming phase.

From micromachines to spacecraft

One reason the result stood out was its range: the same physics could matter to development of several projects in the future.

At small scales, contact-free motion could move delicate parts inside future miniaturized machines without tethers, gears, or onboard propellant.

Farther out, laser propulsion may attract interest because a remote power source can keep pushing after rockets run dry and fuel is gone.

This data will help explain why a device drifting through water may matter for future space exploration.

By turning one beam into coordinated sideways thrust and upward lift, this work made abstract momentum both visible and practical.

The next advances will depend on stronger materials, steadier lasers, and test conditions that better match space and survive longer illumination.

The study is published in the journal Newton.

—–

Like what you read? Subscribe to our newsletter for engaging articles, exclusive content, and the latest updates.

Check us out on EarthSnap, a free app brought to you by Eric Ralls and Earth.com.

—–