Hasheminezhad, A., King, D., Ceylan, H. & Kim, S. Comparative life cycle assessment of natural and recycled aggregate concrete: a review. Sci. Total. Env. 950, 175310 (2024).
Peduzzi, P. et al. Sand and sustainability: 10 strategic recommendations to avert a crisis. UN Environment Programme https://www.unep.org/resources/report/sand-and-sustainability-10-strategic-recommendations-avert-crisis (2022).
A. Laguna & P. Peduzzi. Our use of sand brings us “up against the wall”, says UNEP report. UN Environment Programme https://www.unep.org/news-and-stories/press-release/our-use-sand-brings-us-against-wall-says-unep-report?utm_source=chatgpt.com&__cf_chl_tk=hSmS7_LuT.njPO_2RFgvDbgac4FEIHst2E831KHSkJU-1755650785-1.0.1.1-RQmgNOLgl.28mgP.dUZ_.FxnjynA.LwiFhqyPX82qz0 (2022).
Ministry of Natural Resources of the People’s Republic of China. Notice of the Ministry of Natural Resources on Standardizing and Improving the Management of Sand and Gravel Mining [Chinese]. https://gi.mnr.gov.cn/202304/t20230419_2782795.html (2023).
de Andrade Salgado, F. & de Andrade Silva, F. Recycled aggregates from construction and demolition waste towards an application on structural concrete: a review. J. Build. Eng. 52, 104452 (2022).
Wang, B., Yan, L., Fu, Q. & Kasal, B. A comprehensive review on recycled aggregate and recycled aggregate concrete. Resour. Conserv. Recycl. 171, 105565 (2021).
Ghisellini, P., Ripa, M. & Ulgiati, S. Exploring environmental and economic costs and benefits of a circular economy approach to the construction and demolition sector. A literature review. J. Clean. Prod. 178, 618–643 (2018).
Fraj, A. B. & Idir, R. Concrete based on recycled aggregates—recycling and environmental analysis: a case study of Paris’ region. Constr. Build. Mater. 157, 952–964 (2017).
Xing, W., Tam, V. W. Y., Le, K. N., Hao, J. L. & Wang, J. Life cycle assessment of recycled aggregate concrete on its environmental impacts: a critical review. Constr. Build. Mater. 317, 125950 (2022).
Hu, X., Wan-Wendner, L., Molkens, T. & Gruyaert, E. A review on mesoscale modeling of recycled aggregate concrete—advances, challenges, and perspectives. J. Build. Eng. 114, 114272 (2025).
Duan, Z. et al. Building demolition and solid waste recycling technologies: prospects and paths [Chinese]. Strategic Study CAE 27, 1–12 (2025).
Ambrós, W. M., Cazacliu, B. G. & Sampaio, C. H. Wall effects on particle separation in air jigs. Powder Technol. 301, 369–378 (2016).
Jankovic, K., Nikolic, D. & Bojovic, D. Concrete paving blocks and flags made with crushed brick as aggregate. Constr. Build. Mater. 28, 659–663 (2012).
Mora, C. F., Kwan, A. K. H. & Chan, H. C. Particle size distribution analysis of coarse aggregate using digital image processing. Cem. Concr. Res. 28, 921–932 (1998).
Hu, K., Chen, Y., Naz, F., Zeng, C. & Cao, S. Separation studies of concrete and brick from construction and demolition waste. Waste Manage. 85, 396–404 (2019).
Di Maria, F., Bianconi, F., Micale, C., Baglioni, S. & Marionni, M. Quality assessment for recycling aggregates from construction and demolition waste: an image-based approach for particle size estimation. Waste Manage. 48, 344–352 (2016).
Anding, K., Garten, D. & Linß, E. Application of intelligent image processing in the construction material industry. Waste Manage. https://doi.org/10.21014/acta_imeko.v2i1.100 (2013).
Xiao, J. et al. Principles for waste concrete recycling and basic problems of recycled concrete [Chinese]. Chin. Sci. Bull. 68, 510–523 (2022).
Neupane, R. P., Devi, N. R., Imjai, T., Rajput, A. & Noguchi, T. Cutting-edge techniques and environmental insights in recycled concrete aggregate production: a comprehensive review. Resour. Conserv. Recycl. Adv. 25, 200241 (2025).
Wang, X., Li, N., Du, J. & Wang, W. Concrete crushing based on the high-voltage pulse discharge technology. J. Build. Eng. 41, 102366 (2021).
Wang, D. Research and Application of High-efficiency Screening and Grading Equipment [Chinese]. Master thesis, Kunming Univ. Science and Technology (2023).
Wang, W. & Du, H. An intelligent screening and processing device for construction waste [Chinese]. China Patent ZL202211416519.9 (2022).
Kim, J. Influence of quality of recycled aggregates on the mechanical properties of recycled aggregate concretes: an overview. Constr. Build. Mater. 328, 127071 (2022).
Yang, X. et al. Straightening methods for RCA and RAC—a review. Cem. Concr. Comp. 141, 105145 (2023).
de Juan, M. S. & Gutiérrez, P. A. Study on the influence of attached mortar content on the properties of recycled concrete aggregate. Constr. Build. Mater. 23, 872–877 (2009).
Duan, Z. & Poon, C. S. Properties of recycled aggregate concrete made with recycled aggregates with different amounts of old adhered mortars. Mater. Des. 58, 19–29 (2014).
Ouyang, K. et al. Influence of pre-treatment methods for recycled concrete aggregate on the performance of recycled concrete: a review. Resour. Conserv. Recyc. 188, 106717 (2023).
Kim, J. H., Sung, J. H., Jeon, C. S., Lee, S. H. & Kim, H. S. A study on the properties of recycled aggregate concrete and its production facilities. Appl. Sci. 9, 1935 (2019).
Chen, W., Shao, Z., Wei, W., Zhang, P. & Hong, Y. Properties of concrete incorporating microwave treated coarse aggregate: an experimental study. Structures 33, 693–702 (2021).
Yoon, H. S., Seo, E. A., Kim, D. G. & Yang, K. H. Efficiency of dry calcination and trituration treatments for removing cement pastes attached to recycled coarse aggregates. Constr. Build. Mater. 312, 125412 (2021).
Feng, C. et al. Research progress on treatment methods of building recycled concrete aggregates [Chinese]. Mater. Rep. 36, 20080099 (2022).
Akbarnezhad, A., Ong, K. C. G., Zhang, M. H., Tam, C. T. & Foo, T. W. J. Microwave-assisted beneficiation of recycled concrete aggregates. Constr. Build. Mater. 25, 3469–3479 (2011).
Shima, H., Tateyashiki, H., Matsuhashi, R. & Yoshida, Y. An advanced concrete recycling technology and its applicability assessment through input–output analysis. J. Adv. Concr. Technol. 3, 53–67 (2005).
Kim, H. S., Kim, B., Kim, K. S. & Kim, J. M. Quality improvement of recycled aggregates using the acid treatment method and the strength characteristics of the resulting mortar. J. Mater. Cycles Waste Manage. 19, 968–976 (2016).
Pan, Z. et al. The hydration, pore structure and strength of cement-based material prepared with waste soaking solution from acetic acid treatment of regenerated aggregates. J. Clean. Prod. 235, 866–874 (2019).
Thaue, W., Iwanami, M., Nakayama, K. & Yodsudjai, W. Influence of acetic acid treatment on microstructure of interfacial transition zone and performance of recycled aggregate concrete. Constr. Build. Mater. 417, 135355 (2024).
Zhou, Y. et al. Experimental and numerical investigation on the microstructure and failure characteristics of concrete using strengthened recycled coarse aggregate. J. Build. Eng. 66, 105880 (2023).
Zhu, Y., Kou, S., Poon, C. S., Dai, J. & Li, Q. Influence of silane-based water repellent on the durability properties of recycled aggregate concrete. Cem. Concr. Compos. 35, 32–38 (2013).
Lu, D., Wang, D., Wang, Y. & Zhong, J. Nano-engineering the interfacial transition zone between recycled concrete aggregates and fresh paste with graphene oxide. Constr. Build. Mater. 384, 131244 (2023).
Han, Y. et al. Chloride ion penetration resistance of matrix and interfacial transition zone of multi-walled carbon nanotube-reinforced concrete. J. Build. Eng. 72, 106587 (2023).
Silva, R. V., Neves, R., de Brito, J. & Dhir, R. K. Carbonation behaviour of recycled aggregate concrete. Cem. Concr. Comp. 62, 22–32 (2015).
Sequeira, L., Forero, J., Bravo, M., Evangelista, L. & de Brito, J. Durability of concrete with partial replacement of Portland cement by incorporating reactive magnesium oxide and fly ash. Materials 16, 2670 (2023).
Xiao, J., Jiang, Y., Wang, D., Noguchi, T. & Lu, Z. Global CO2 sequestration potential of recycled aggregates: modeling, life cycle analysis, and accelerated carbonation strategies. Waste Manag. 204, 114951 (2025).
Liang, C., Lu, N., Ma, H., Ma, Z. & Duan, Z. Carbonation behavior of recycled concrete with CO2-curing recycled aggregate under various environments. J. CO2 Util. 39, 101185 (2020).
Zhang, T. et al. Durability of concrete containing carbonated recycled aggregates: a comprehensive review. Cem. Concr. Comp. 156, 105865 (2025).
Shuvo, A. K., Sarker, P. K. & Shaikh, F. U. A. Efficacy of various accelerated carbonation techniques to improve recycled concrete aggregates: a comprehensive review. J. Build. Eng. 95, 110257 (2024).
Feng, R. & Xian, X. A review for accelerated carbonation improvement of recycled concrete coarse aggregates and the meta-analysis of environmental benefit assessment and cost analysis of concrete so produced. J. Build. Eng. 106, 112649 (2025).
Kong, D. et al. Effect and mechanism of surface-coating pozzalanics materials around aggregate on properties and ITZ microstructure of recycled aggregate concrete. Constr. Build. Mater. 24, 701–708 (2010).
Katz, A. Treatments for the improvement of recycled aggregate. J. Mater. Civ. Eng. 16, 597–603 (2004).
Shaban, W. M. et al. Effect of pozzolan slurries on recycled aggregate concrete: mechanical and durability performance. Constr. Build. Mater. 276, 121940 (2021).
Shi, C., Wu, Z., Cao, Z., Ling, T. C. & Zheng, J. Performance of mortar prepared with recycled concrete aggregate enhanced by CO2 and pozzolan slurry. Cem. Concr. Comp. 86, 130–138 (2018).
Xuan, D., Zhan, B. & Poon, C. S. Assessment of mechanical properties of concrete incorporating carbonated recycled concrete aggregates. Cem. Concr. Comp. 65, 67–74 (2016).
Ying, J., Zhou, B. & Xiao, J. Pore structure and chloride diffusivity of recycled aggregate concrete with nano-SiO2 and nano-TiO2. Constr. Build. Mater. 150, 49–55 (2017).
Diamond, S., Sahu, S. & Thaulow, N. Reaction products of densified silica fume agglomerates in concrete. Cem. Concr. Res. 34, 1625–1632 (2004).
Singh, L. P., Bisht, V., Aswathy, M. S., Chaurasia, L. & Gupta, S. Studies on performance enhancement of recycled aggregate by incorporating bio and nano materials. Constr. Build. Mater. 181, 217–226 (2018).
Liu, Z., Chin, C. S. & Xia, J. Improving recycled coarse aggregate (RCA) and recycled coarse aggregate concrete (RCAC) by biological denitrification phenomenon. Constr. Build. Mater. 301, 124338 (2021).
De Muynck, W., De Belie, N. & Verstraete, W. Microbial carbonate precipitation in construction materials: a review. Ecol. Eng. 36, 118–136 (2010).
Liu, K., Zheng, J., Xie, W., Dong, S. & Duan, Z. Mixture design method of recycled aggregate concrete based on machine learning [Chinese]. J. Hunan Univ. 50, 88–96 (2023).
Yao, Y. & Hong, B. Evolution of recycled concrete research: a data-driven scientometric review. Low-carbon Mater. Green. Constr. https://doi.org/10.1007/s44242-024-00047-5 (2024).
Xiao, J. Recycled Aggregate Concrete Structures (Springer, 2018).
Meng, D., Wu, X., Quan, H. & Zhu, C. A strength-based mix design method for recycled aggregate concrete and consequent durability performance. Constr. Build. Mater. 281, 122616 (2021).
Deng, F. et al. Compressive strength prediction of recycled concrete based on deep learning. Constr. Build. Mater. 175, 562–569 (2018).
Khademi, F., Jamal, S. M., Deshpande, N. & Londhe, S. Predicting strength of recycled aggregate concrete using artificial neural network, adaptive neuro-fuzzy inference system and multiple linear regression. Int. J. Sustain. Built Environ. 5, 355–369 (2016).
Zhang, B. et al. Sustainable mix design and carbon emission analysis of recycled aggregate concrete based on machine learning and big data methods. J. Clean. Prod. 489, 144734 (2025).
Biswal, U. S., Mishra, M., Singh, M. K. & Pasla, D. Experimental investigation and comparative machine learning prediction of the compressive strength of recycled aggregate concrete incorporated with fly ash, GGBS, and metakaolin. Innovative Infrastruct. Solut. 7, 1–20 (2022).
Erdem, S., Dawson, A. R. & Thom, N. H. Influence of the micro- and nanoscale local mechanical properties of the interfacial transition zone on impact behavior of concrete made with different aggregates. Cem. Concr. Res. 42, 447–458 (2012).
Zhang, H. & Zhao, Y. Integrated interface parameters of recycled aggregate concrete. Constr. Build. Mater. 101, 861–877 (2015).
Zhang, H. et al. Mechanical behavior of ultra-high performance concrete (UHPC) using recycled fine aggregate cured under different conditions and the mechanism based on integrated microstructural parameters. Constr. Build. Mater. 192, 489–507 (2018).
Zhao, H. & Zhou, A. Effects of recycled aggregates on mechanical and fractural properties of concrete: Insights from DEM modelling. Compos. Part. A-Appl. S 186, 108395 (2024).
Chen, Q., Zhang, J., Wang, Z., Zhao, T. & Wang, Z. A review of the interfacial transition zones in concrete: identification, physical characteristics, and mechanical properties. Eng. Fract. Mech. 300, 109979 (2024).
Wu, K., Han, H., Xu, L., Yang, X. & De Schutter, G. Supported ITZ modification efficiencies via surface coating nanoparticles on aggregate and its influence on properties. Materials 12, 3541 (2019).
Wu, K., Shi, H., Xu, L., Ye, G. & De Schutter, G. Microstructural characterization of ITZ in blended cement concretes and its relation to transport properties. Cem. Concr. Res. 79, 243–256 (2016).
Chen, R., Mo, K. & Ling, T. Offsetting strength loss in concrete via ITZ enhancement: from the perspective of utilizing new alternative aggregate. Cem. Concr. Comp. 127, 104385 (2022).
Branch, J. L., Epps, R. & Kosson, D. S. The impact of carbonation on bulk and ITZ porosity in microconcrete materials with fly ash replacement. Cem. Concr. Res. 103, 170–178 (2018).
Ollivier, J. P., Maso, J. C. & Bourdette, B. Interfacial transition zone in concrete. Adv. Cem. Based Mater. 2, 30–38 (1995).
Gao, X. et al. A new model for investigating the formation of interfacial transition zone in cement-based materials. Cem. Concr. Res. 187, 107675 (2025).
Fang, G. & Zhang, M. The evolution of interfacial transition zone in alkali-activated fly ash–slag concrete. Cem. Concr. Res. 129, 105963 (2020).
Scrivener, K. L., Crumbie, A. K. & Laugesen, P. The interfacial transition zone (ITZ) between cement paste and aggregate in concrete. Interface Sci. 12, 411–421 (2004).
Huang, Y., Hu, X., Shi, C. & Wu, M. Review on the formation and improvement of interfacial transition zone between cement paste and aggregate in concrete [Chinese]. Mater. Rep. 37, 21050009 (2023).
Carrara, P. & De Lorenzis, L. Consistent identification of the interfacial transition zone in simulated cement microstructures. Cem. Concr. Comp. 80, 224–234 (2017).
He, J., Lei, D. & Xu, W. In-situ measurement of nominal compressive elastic modulus of interfacial transition zone in concrete by SEM–DIC coupled method. Cem. Concr. Comp. 114, 103779 (2020).
Hashin, Z. & Monteiro, P. J. M. An inverse method to determine the elastic properties of the interphase between the aggregate and the cement paste. Cem. Concr. Res. 32, 1291–1300 (2002).
Xiao, J., Li, W., Sun, Z., Lange, D. A. & Shah, S. P. Properties of interfacial transition zones in recycled aggregate concrete tested by nanoindentation. Cem. Concr. Comp. 37, 276–292 (2013).
Karen, L. & Scrivener, K. M. N. The percolation of pore space in the cement paste/aggregate interfacial zone of concrete. Cem. Concr. Res. 26, 35–40 (1996).
Shen, Q., Pan, G. & Zhan, H. Effect of interfacial transition zone on the carbonation of cement-based materials. J. Mater. Civ. Eng. https://doi.org/10.1061/(asce)mt.1943-5533.0001860 (2017).
Huang, K.-S. & Yang, C.-C. Determination of the chloride migration coefficient for interfacial transition zone in cement-based material with fly ash replacement. Cem. Concr. Comp. 130, 104558 (2022).
Cwirzen, A. & Penttala, V. Aggregate–cement paste transition zone properties affecting the salt–frost damage of high-performance concretes. Cem. Concr. Res. 35, 671–679 (2005).
Zheng, S., Qi, L., He, R., Wu, J. & Wang, Z. Erosion damage and expansion evolution of interfacial transition zone in concrete under dry–wet cycles and sulfate erosion. Constr. Build. Mater. 307, 124954 (2021).
Pradhan, S., Kumar, S. & Barai, S. V. Multi-scale characterisation of recycled aggregate concrete and prediction of its performance. Cem. Concr. Comp. 106, 103480 (2020).
Liu, J. et al. Influence of recycled concrete aggregate enhancement methods on the change of microstructure of ITZs in recycled aggregate concrete. Constr. Build. Mater. 371, 130772 (2023).
Lee, G. C. & Choi, H. B. Study on interfacial transition zone properties of recycled aggregate by micro-hardness test. Constr. Build. Mater. 40, 455–460 (2013).
Gebremariam, H. G., Taye, S. & Tarekegn, A. G. Disparity in research findings on parent concrete strength effects on recycled aggregate quality as a challenge in aggregate recycling. Case Stud. Constr. Mat. 19, e02342 (2023).
Rossignolo, J. A. Interfacial interactions in concretes with silica fume and SBR latex. Constr. Build. Mater. 23, 817–821 (2009).
Gao, Y. et al. Characterization of ITZ in ternary blended cementitious composites: experiment and simulation. Constr. Build. Mater. 41, 742–750 (2013).
Butler, L., West, J. S. & Tighe, S. L. The effect of recycled concrete aggregate properties on the bond strength between RCA concrete and steel reinforcement. Cem. Concr. Res. 41, 1037–1049 (2011).
Wagih, A. M., El-Karmoty, H. Z., Ebid, M. & Okba, S. H. Recycled construction and demolition concrete waste as aggregate for structural concrete. HBRC J. 9, 193–200 (2019).
Verian, K. P. Using Recycled Concrete as Coarse Aggregate in Pavement Concrete. Master thesis, Purdue Univ. (2012).
Elsheikh, A., Al-Zayadi, S. K. & Albo-Hassan, A. S. Experimental investigation of concrete incorporating recycled concrete aggregates. Innovative Infrastruct. Solut. https://doi.org/10.1007/s41062-024-01486-6 (2024).
Zarei, A., Sharghi, M., Jeong, H. & Afshin, H. A comparative evaluation of modification methods for improving the mechanical properties of recycled aggregate–recycled steel fiber concrete. KSCE J. Civ. Eng. 28, 3962–3975 (2024).
Mahmood, A., Nanos, N. & Begg, D. An evaluation of the strength for recycled fine aggregate replacement in cementitious mortars. Buildings 14, 470 (2024).
Faleschini, F. et al. Rheology of fresh concretes with recycled aggregates. Constr. Build. Mater. 73, 407–416 (2014).
Guo, H. et al. Durability of recycled aggregate concrete—a review. Cem. Concr. Comp. 89, 251–259 (2018).
Wang, R., Hu, Z., Li, Y., Wang, K. & Zhang, H. Review on the deterioration and approaches to enhance the durability of concrete in the freeze–thaw environment. Constr. Build. Mater. 321, 126371 (2022).
Wu, J., Jing, X. & Wang, Z. Uni-axial compressive stress-strain relation of recycled coarse aggregate concrete after freezing and thawing cycles. Constr. Build. Mater. 134, 210–219 (2017).
Sun, J. & Geng, J. Effect of particle size and content of recycled fine aggregate on frost resistance of concrete [Chinese]. J. Build. Mater. 15, 382–385 (2012).
Hong, S., Choi, J., Yuan, T. & Yoon, Y. A review on concrete creep characteristics and its evaluation on high-strength lightweight concrete. J. Mater. Res. Technol. 22, 230–251 (2023).
Rossi, P., Tailhan, J. L., Le Maou, F., Gaillet, L. & Martin, E. Basic creep behavior of concretes investigation of the physical mechanisms by using acoustic emission. Cem. Concr. Res. 42, 61–73 (2012).
Bažant, Z. P., Hauggaard, A. B., Baweja, S. & Ulm, F. J. Microprestress-solidification theory for concrete creep. I: aging and drying effects. J. Eng. Mech. 123, 1181–1194 (1997).
Fathifazl, G. et al. Creep and drying shrinkage characteristics of concrete produced with coarse recycled concrete aggregate. Cem. Concr. Comp. 33, 1026–1037 (2011).
Tam, V. W. Y., Kotrayothar, D. & Xiao, J. Long-term deformation behaviour of recycled aggregate concrete. Constr. Build. Mater. 100, 262–272 (2015).
Bravo, M., Brito, J. & Evangelista, L. Thermal performance of concrete with recycled aggregates from CDW plants. Appl. Sci. 7, 740 (2017).
Leiva, C., Solís-Guzmán, J., Marrero, M. & García Arenas, C. Recycled blocks with improved sound and fire insulation containing construction and demolition waste. Waste Manage. 33, 663–671 (2013).
Zhao, H., Liu, F. & Yang, H. Thermal properties of coarse RCA concrete at elevated temperatures. Appl. Therm. Eng. 140, 180–189 (2018).
Chen, Z., Xiao, J. & Ding, T. Behaviours of novel prefabricated RAC–HSC composite beams subjected to fire: an experimental and numerical study. Eng. Struct. 322, 119108 (2025).
Xiao, J., Tang, Y., Zhang, K. & Yang, H. Stress–strain relationship of recycled coarse aggregate concrete [Chinese]. Eng. Mech. 41, 43–55 (2024).
Deng, Z., Sheng, J. & Wang, Y. Strength and constitutive model of recycled concrete under biaxial compression. KSCE J. Civ. Eng. 23, 699–710 (2018).
Xiao, J., Li, H. & Yang, Z. Fatigue behavior of recycled aggregate concrete under compression and bending cyclic loadings. Constr. Build. Mater. 38, 681–688 (2013).
Li, X., Lu, C., Sun, H. & Cui, Y. Evaluation of residual bond behaviour between rebar and recycled aggregate concrete after high-temperature exposure followed by water spray cooling. Eng. Struct. 306, 117837 (2024).
Dong, H., Song, Y., Cao, W., Sun, W. & Zhang, J. Flexural bond behavior of reinforced recycled aggregate concrete. Constr. Build. Mater. 213, 514–527 (2019).
Xiao, J. & Falkner, H. Bond behaviour between recycled aggregate concrete and steel rebars. Constr. Build. Mater. 21, 395–401 (2007).
Kim, S.-W., Yun, H.-D., Park, W.-S. & Jang, Y.-I. Bond strength prediction for deformed steel rebar embedded in recycled coarse aggregate concrete. Mater. Des. 83, 257–269 (2015).
Guerra, M., Ceia, F., de Brito, J. & Júlio, E. Anchorage of steel rebars to recycled aggregates concrete. Constr. Build. Mater. 72, 113–123 (2014).
Li, Z., Deng, Z., Yang, H. & Wang, H. Bond behavior between recycled aggregate concrete and deformed rebar after freeze–thaw damage. Constr. Build. Mater. 250, 118805 (2020).
Jiang, J., Yang, H., Deng, Z. & Li, Z. Bond performance of deformed rebar embedded in recycled aggregate concrete subjected to repeated loading after freeze–thaw cycles. Constr. Build. Mater. 318, 125954 (2022).
Li, Z., Deng, Z., Yang, H., Tang, Z. & Wang, W. Bond strength between recycled concrete and rebar under stirrup constraint after freeze–thaw cycles. KSCE J. Civ. Eng. 27, 727–739 (2023).
Zhang, J., Tao, X., Li, X., Zhang, Y. & Liu, Y. Analytical and experimental investigation of the bond behavior of confined high-strength recycled aggregate concrete. Constr. Build. Mater. 315, 125636 (2022).
Xiao, J., Cheng, Z., Zhou, Z. & Wang, C. Structural engineering applications of recycled aggregate concrete: seismic performance, guidelines, projects and demonstrations. Case Stud. Constr. Mat. 17, e01520 (2022).
Zhang, J., Zhao, Y., Li, X., Li, Y. & Dong, H. Experimental study on seismic performance of recycled aggregate concrete shear wall with high-strength steel bars. Structures 33, 1457–1472 (2021).
Xiao, J., Huang, Y., Yang, J. & Zhang, C. Mechanical properties of confined recycled aggregate concrete under axial compression. Constr. Build. Mater. 26, 591–603 (2012).
Xiao, J., Tresserras, J. & Tam, V. W. Y. GFRP-tube confined RAC under axial and eccentric loading with and without expansive agent. Constr. Build. Mater. 73, 575–585 (2014).
Xiao, J. & Yang, J. On recycled concrete confined by GFRP tube under axial compression [Chinese]. J. Tongji Univ. 37, 1586–1591 (2009).
Chen, Z. & Xiao, J. Fire-insulation properties of recycled aggregate concrete, its application in composite concrete structures, and concrete–concrete interface effects: a review. J. Build. Eng. 107, 112681 (2025).
Fang, S., Liu, F., Xiong, Z., Fang, J. & Li, L. Seismic performance of recycled aggregate concrete-filled glass fibre-reinforced polymer-steel composite tube columns. Constr. Build. Mater. 225, 997–1010 (2019).
Zhang, Y., Cao, W., Zhou, Z., Dong, H. & Cheng, J. Experimental study on seismic behavior of mid-rise recycled aggregate concrete shear wall with insulation blocks and single layer reinforcement [Chinese]. J. Build. Struct. 36, 29–36 (2015).
Xiao, J., Zhang, K., Ding, T., Zhang, Q. & Xiao, X. Fundamental issues towards unified design theory of recycled and natural aggregate concrete components. Engineering 29, 188–197 (2023).
Seara-Paz, S., González-Fonteboa, B., Martínez-Abella, F. & Eiras-López, J. Deformation recovery of reinforced concrete beams made with recycled coarse aggregates. Eng. Struct. 251, 113482 (2022).
Xiao, J. et al. Deformation behavior and low-carbon assessment of large-span beam with fully recycled concrete. Strategic Study CAE 27, 1–14 (2025).
Chen, B., Zhao, Y. & Peng, L. Long-term performance of recycled aggregate concrete beams exposed to 10 years of loading and chloride environments. Eng. Struct. 333, 120140 (2025).
Xiao, J., Zhang, K., Cao, W. & Bai, G. Time-dependent reliability-based design of recycled aggregate concrete structures [Chinese]. J. Build. Struct. 41, 17–27 (2020).
Pacheco, J., de Brito, J. & Lamperti Tornaghi, M. Use of Recycled Aggregates in Concrete: Opportunities for Upscaling in Europe 1–79 (Publications Office of the European Union, 2023).
Vancura, M., Khazanovich, L. & Tompkins, D. Reappraisal of recycled concrete aggregate as coarse aggregate in concretes for rigid pavements. Transport. Res. Rec. 2113, 149–155 (2009).
Nguyen, A. D. & Dosho, Y. Performance evaluation and mix proportion design of concrete using low-quality recycled aggregate. J. Struct. Constr. Eng. 88, 1060–1071 (2023).
Koga, H., Katahira, H. & Shimata, A. The introduction of recycled-aggregate concrete specifications in Japan and the research into the freezing–thawing resistance of recycled-aggregate concrete. J. Mater. Cycles Waste Manage. 24, 1207–1215 (2022).
Kleijer, A. L., Lasvaux, S., Citherlet, S. & Viviani, M. Product-specific life cycle assessment of ready mix concrete: comparison between a recycled and an ordinary concrete. Resour. Conserv. Recyc. 122, 210–218 (2017).
Katerusha, D. Barriers to the use of recycled concrete from the perspective of executing companies and possible solution approaches—case study Germany and Switzerland. Resour. Policy 73, 102212 (2021).
Bao, Z., Lee, W. M. W. & Lu, W. Implementing on-site construction waste recycling in Hong Kong: barriers and facilitators. Sci. Total. Env. 747, 141091 (2020).
Ma, M., Tam, V. W. Y., Le, K. N. & Li, W. Challenges in current construction and demolition waste recycling: a China study. Waste Manag. 118, 610–625 (2020).
Shanghai Municipal Development & Reform Commission. Shanghai Municipal Special Support Measures for Circular Economy Development and Comprehensive Resource Utilization [Chinese]. https://fgw.sh.gov.cn/fgw_gfxwj/20211210/56dd45256c1c4e8b96eeb4f0a289f1dc.html (2021).
Wang, C., Xiao, J., Zhang, C. & Xiao, X. Structural health monitoring and performance analysis of a 12-story recycled aggregate concrete structure. Eng. Struct. 205, 110102 (2020).
Xia, B., Xiao, J. & Li, S. Sustainability-based reliability design for reuse of concrete components. Struct. Saf. 98, 102241 (2022).
Ding, T., Xiao, J., Zhang, Q. & Akbarnezhad, A. Experimental and numerical studies on design for deconstruction concrete connections: an overview. Adv. Struct. Eng. 21, 2198–2214 (2018).
Xia, B., Xiao, J., Lv, F. & Wang, Y. Mechanical analysis and fundamental philosophy for deconstruction of structures. J. Tongji Univ. 48, 1083–1092 (2020).
Xiao, J. et al. Exploration of low-carbon approximate probability design method for concrete structures [Chinese]. Chin. Sci. Bull. 69, 4137–4150 (2024).
Dilbas, H. & Çakır, Ö Physical and mechanical properties of treated recycled aggregate concretes: combination of mechanical treatment and silica fume. J. Mater. Civ. Eng. 33, 04021096 (2021).
Xia, G. & Zhao, Y. Interface parameters of recycled aggregate concrete considering the distribution of old mortar content. Case Stud. Constr. Mat. 20, e03262 (2024).
Kim, Y., Hanif, A., Usman, M. & Park, W. Influence of bonded mortar of recycled concrete aggregates on interfacial characteristics—porosity assessment based on pore segmentation from backscattered electron image analysis. Constr. Build. Mater. 212, 149–163 (2019).
Pepe, M., Toledo Filho, R. D., Koenders, E. A. B. & Martinelli, E. A novel mix design methodology for recycled aggregate concrete. Constr. Build. Mater. 122, 362–372 (2016).
Ma, Z., Hu, R., Yao, P. & Wang, C. Utilizing heat-mechanical synergistic treatment for separating concrete waste into high-quality recycled aggregate, active recycled powder and new concrete. J. Build. Eng. 68, 106161 (2023).
Akbarnezhad, A., Ong, K. C. G., Tam, C. T. & Zhang, M. H. Effects of the parent concrete properties and crushing procedure on the properties of coarse recycled concrete aggregates. J. Mater. Civ. Eng. 25, 1795–1802 (2013).
Gupta, P. K., Rajhans, P., Panda, S. K., Nayak, S. & Das, S. K. Mix design method for self-compacting recycled aggregate concrete and its microstructural investigation by considering adhered mortar in aggregate. J. Mater. Civ. Eng. 32, 0003014 (2020).
Zega, C. J., Villagrán-Zaccardi, Y. A. & Di Maio, A. A. Effect of natural coarse aggregate type on the physical and mechanical properties of recycled coarse aggregates. Mater. Struct. 43, 195–202 (2009).
Amario, M., Pepe, M., Rangel, C. S. & Toledo Filho, R. D. Autogenous and drying shrinkage of structural concretes incorporating recycled concrete aggregates from different sources. Struct. Concr. 24, 1780–1792 (2022).
Prasad, M. L. V. & Rathish Kumar, P. Strength studies on glass fiber reinforced recycled aggregate concrete. Asian J. Civ. Eng. 8, 677–690 (2007).
Abd Elhakam, A., Mohamed, A. E. & Awad, E. Influence of self-healing, mixing method and adding silica fume on mechanical properties of recycled aggregates concrete. Constr. Build. Mater. 35, 421–427 (2012).
Allal, M., Zeghichi, L. & Siline, M. Optimization of the recycled aggregate processing using the full factorial design approach, chemical, physical and microstructural characterization of treated aggregates by pre-coated with cementitious paste. J. Build. Eng. 94, 109852 (2024).
Al-Waked, Q., Bai, J., Kinuthia, J. & Davies, P. Enhancement of mechanical properties of concrete with treated demolition waste aggregate. J. Build. Eng. 58, 105047 (2022).
Wang, Y., Zhang, H., Geng, Y., Wang, Q. & Zhang, S. Prediction of the elastic modulus and the splitting tensile strength of concrete incorporating both fine and coarse recycled aggregate. Constr. Build. Mater. 215, 332–346 (2019).
Chen, G. M., He, Y. H., Jiang, T. & Lin, C. J. Behavior of CFRP-confined recycled aggregate concrete under axial compression. Constr. Build. Mater. 111, 85–97 (2016).
Choi, D., Hong, K., Ochirbud, M., Meiramov, D. & Sukontaskuul, P. Mechanical properties of ultra-high performance concrete (UHPC) and ultra-high performance fiber-reinforced concrete (UHPFRC) with recycled sand. Int. J. Concr. Struct. M. https://doi.org/10.1186/s40069-023-00631-2 (2023).
Dimitriou, G., Savva, P. & Petrou, M. F. Enhancing mechanical and durability properties of recycled aggregate concrete. Constr. Build. Mater. 158, 228–235 (2018).
Ferrández, D., Zaragoza-Benzal, A., Pastor Lamberto, R., Santos, P. & Michalak, J. Optimizing masonry mortar: experimental insights into physico-mechanical properties using recycled aggregates and natural fibers. Appl. Sci. 14, 6226 (2024).
Fonseca, N., de Brito, J. & Evangelista, L. The influence of curing conditions on the mechanical performance of concrete made with recycled concrete waste. Cem. Concr. Comp. 33, 637–643 (2011).
Gesoglu, M., Güneyisi, E., Öz, H. Ö, Taha, I. & Yasemin, M. T. Failure characteristics of self-compacting concretes made with recycled aggregates. Constr. Build. Mater. 98, 334–344 (2015).
González-Fonteboa, B. & Martínez-Abella, F. Concretes with aggregates from demolition waste and silica fume. Materials and mechanical properties. Build. Environ. 43, 429–437 (2008).
Guo, M. et al. Performance evaluation of recycled aggregate concrete incorporating limestone calcined clay cement (LC3). J. Clean. Prod. 366, 132820 (2022).
Hawileh, R. A. et al. Residual mechanical properties of recycled aggregate concrete at elevated temperatures. Fire Mater. 48, 138–151 (2023).
Huang, D., Liu, Z., Ma, W., Lu, Y. & Li, S. Steel fiber-reinforced recycled aggregate concrete-filled GFRP tube columns: axial compression performance. Constr. Build. Mater. 403, 133143 (2023).
Kou, S. C. & Poon, C. S. Enhancing the durability properties of concrete prepared with coarse recycled aggregate. Constr. Build. Mater. 35, 69–76 (2012).
Lei, B. et al. Mechanical properties of multi-recycled aggregate concrete under combined compression–shear loading. Eng. Fail. Anal. 143, 106910 (2023).
Li, J., Chen, L., Wang, Z. & Wang, Y. Effect of modification and replacement rate of recycled coarse aggregate on properties of recycled aggregate concrete. IJST-T. Civ. Eng. 47, 3321–3332 (2023).
Ma, W., Wang, Y., Huang, L., Yan, L. & Kasal, B. Natural and recycled aggregate concrete containing rice husk ash as replacement of cement: mechanical properties, microstructure, strength model and statistical analysis. J. Build. Eng. 66, 105917 (2023).
Mandal, R., Panda, S. K. & Nayak, S. Evaluation of rheological properties of sustainable self-compacting recycled aggregate concrete produced by two-stage mixing approach. J. Build. Eng. 87, 109126 (2024).
Marchi, T., Garcia Diaz, E., Salgues, M., Souche, J. C. & Devillers, P. Internal curing capacity of recycled coarse aggregates incorporated in concretes with low water/cement ratios. Constr. Build. Mater. 409, 133893 (2023).
Nikmehr, B., Kafle, B. & Al-Ameri, R. Developing a sustainable self-compacting geopolymer concrete with 100% geopolymer-coated recycled concrete aggregate replacement. Smart Sustain. Built 13, 395–424 (2023).
Ortolan, T. L. P. et al. Durability of concrete incorporating recycled coarse aggregates: carbonation and service life prediction under chloride-induced corrosion. Constr. Build. Mater. 404, 133267 (2023).
Pedro, D., de Brito, J. & Evangelista, L. Structural concrete with simultaneous incorporation of fine and coarse recycled concrete aggregates: mechanical, durability and long-term properties. Constr. Build. Mater. 154, 294–309 (2017).
Rahal, K. Mechanical properties of concrete with recycled coarse aggregate. Build. Environ. 42, 407–415 (2007).
Thomas, J., Thaickavil, N. N. & Wilson, P. M. Strength and durability of concrete containing recycled concrete aggregates. J. Build. Eng. 19, 349–365 (2018).
Wang, D., Xu, Y., Zheng, Y. & Wu, Y. Effect of freeze–thaw cycles on physical and mechanical properties of concrete with different replacement rates of recycled coarse aggregate. Int. J. Pavement Res. T. https://doi.org/10.1007/s42947-023-00397-6 (2023).
Xiao, J., Li, J. & Zhang, C. Mechanical properties of recycled aggregate concrete under uniaxial loading. Cem. Concr. Res. 35, 1187–1194 (2005).
Yang, G. et al. Study on the mechanical properties and durability of recycled aggregate concrete under the internal curing condition. Materials 15, 5914 (2022).
Yang, J., Du, Q. & Bao, Y. Concrete with recycled concrete aggregate and crushed clay bricks. Constr. Build. Mater. 25, 1935–1945 (2011).
Zheng, C. et al. Mechanical properties of recycled concrete with demolished waste concrete aggregate and clay brick aggregate. Results Phys. 9, 1317–1322 (2018).
Myle, N. J., Wonchang, C. & Taher, A. L. Use of recycled aggregate and fly ash in concrete pavement. Am. J. Eng. Appl. Sci. 4, 201–208 (2011).
Dabhade, A. N., Choudhari, S. R. & Gajbhiye, A. R. Performance evaluation of recycled aggregate used in concrete. Int. J. Eng. Res. Appl. 2, 1387–1391 (2012).
Kou, S. C., Poon, C. S. & Chan, D. Influence of fly ash as cement replacement on the properties of recycled aggregate concrete. J. Mater. Civ. Eng. 19, 709–717 (2007).
Rao, M. C., Bhattacharyya, S. K. & Barai, S. V. Influence of field recycled coarse aggregate on properties of concrete. Mater. Struct. 44, 205–220 (2010).
Tam, V. W. Y. & Tam, C. M. Assessment of durability of recycled aggregate concrete produced by two-stage mixing approach. J. Mater. Sci. 42, 3592–3602 (2007).
Domingo-Cabo, A. et al. Creep and shrinkage of recycled aggregate concrete. Constr. Build. Mater. 23, 2545–2553 (2009).
He, Z., Hu, H., Casanova, I., Liang, C. & Du, S. Effect of shrinkage reducing admixture on creep of recycled aggregate concrete. Constr. Build. Mater. 254, 119312 (2020).
Geng, Y., Wang, Y. & Chen, J. Creep behaviour of concrete using recycled coarse aggregates obtained from source concrete with different strengths. Constr. Build. Mater. 128, 199–213 (2016).
Wang, Q., Geng, Y., Wang, Y. & Zhang, H. Drying shrinkage model for recycled aggregate concrete accounting for the influence of parent concrete. Eng. Struct. 202, 109888 (2020).
Ozbakkaloglu, T., Gholampour, A. & Xie, T. Mechanical and durability properties of recycled aggregate concrete: effect of recycled aggregate properties and content. J. Mater. Civ. Eng. 30, 04017275 (2017).
Zhang, H., Xiao, J., Tang, Y., Duan, Z. & Poon, C. S. Long-term shrinkage and mechanical properties of fully recycled aggregate concrete: testing and modelling. Cem. Concr. Comp. 130, 104527 (2022).
Silva, S., Evangelista, L. & de Brito, J. Durability and shrinkage performance of concrete made with coarse multi-recycled concrete aggregates. Constr. Build. Mater. 272, 121645 (2021).
Xiao, J. et al. How to make concrete sustainable. Nature 638, 888–890 (2025).