Gupta, S., Gnanamoorthy, R., & Kandasubramanian, B. (2025). Additive manufacturing of topology optimized multi-functional cellular framework for enhanced energy absorption. Progress in Additive Manufacturing. 10, 8865–8893. https://doi.org/10.1007/s40964-025-01190-6
Khan, M., ul Haq, M. R., Ahmed, Y. S., & Nazir, A. (2025). Advanced mechanical metamaterials: Hybrid lattice structures, design strategies, multifunctionality, and challenges for additive manufacturing. Advanced Engineering Materials, 27(17), Article 2500308.
Liu, Z., Tian, P., & Wu, H. (2025). Investigations on phase-change transpiration cooling performance of TPMS-based ceramic structures. Applied Thermal Engineering. https://doi.org/10.1016/j.applthermaleng.2025.127607
Çalışkan, C. İ., Özer, G., & Khan, H. M. (2024). A Novel Form ‘Bubble Microstructure’ in LPBF and Investigation of Its Mechanical Strength on TPMS-Gyroid. Metals and Materials International, 31, 971–980. https://doi.org/10.1007/s12540-024-01798-3
Çalışkan, C. İ. (2026). Design for additive manufacturing and lattice structures: opportunities, limitations, and future perspectives. Progress in Additive Manufacturing, 11, 2443–2461. https://doi.org/10.1007/s40964-025-01477-8
Li, H. (2025). Structural Design of Implant Fusion Based on Triple Period Minimal Surface and Its Performance Analysis. J Shanghai Jiaotong Univ Sci. https://doi.org/10.1007/s12204-025-2822-8
Hossain, M. S., Hossain, M. M., & Nilufar, S. (2025). An Overview of Additive Manufacturing of Triply Periodic Minimal Surface (TPMS) Structures. Polymers (Basel), 17(24), 3307.
Liang, F. H., Yassin, A., Tamrin, K. F., & Hamdan, S. (2025). Pore Characterization and Mechanical Properties of Triply Periodic Minimal Surfaces Porous Structures by Fused Deposition Modelling. International Journal of Integrated Engineering, 17(5), 87–97.
Kurup, M., & Jeyaraj, P. (2026). Experimental investigation on vibration and static deflection of 3D printed functionally graded triply periodic minimal surface beams. Lightweight Composites (pp. 135–148). Elsevier. https://doi.org/10.1016/B978-0-443-18852-7.00003-8
Öztürk, F. H., Aktaş, K. G., Karaca, M. M., Temiz, A., & Pehlivan, F. (2026). Design-dependent mechanical performance of additively manufactured hybrid hierarchical TPMS-based auxetic polymer structures. Materials Testing, 68(2), 194–207. https://doi.org/10.1515/mt-2025-0247
Ahmad, S. Z., Masood, M. H., Khattab, M. U., Ahmad, S. S., Zaidi, S. A. A., & Khan, S. Z. (2025). Recent Developments in Novel TPMS Lattice Materials: Design Optimization, Performance Control, and Applications in Biomimetic Scaffolds. Materials, 18(22), 5209.
Kosedag, E. (2025). Investigation of cell size influence on the crushing behavior of gyroid lattices fabricated via FDM. Mechanics of Advanced Materials and Structures, 33(1). https://doi.org/10.1080/15376494.2025.2486750
Zhang, L., Lei, H., Wang, F., Wang, P., Duan, S., & Zhao, Z. (2024). Twist design of lattice structure fabricated by powder bed fusion to adjust the energy absorption behavior. Composite Structures. https://doi.org/10.1016/j.compstruct.2024.118244
Huang, J., & Yang, N. (2023). Composite compression–twist structures made by additive manufacturing for energetic absorption with controllable inner friction. Composite Structures. https://doi.org/10.1016/j.compstruct.2022.116349
Lin, K., et al. (2021). Laser powder bed fusion of bio-inspired honeycomb structures: Effect of twist angle on compressive behaviors. Thin-Walled Structures. https://doi.org/10.1016/j.tws.2020.107252
Singh, A., Jaber, A., & Karathanasopoulos, N. (2025). Fatigue performance of TPMS-based AlSi10Mg architected cellular materials fabricated via hybrid and powder bed fusion methods. International Journal of Fatigue, 193, Article 108758.
Huang, Y., Wang, T., Nie, G., Kang, J., & Yu, H. (2025). A novel short-time heat treatment for stabilizing the compressive behavior of LPBF AlSi10Mg TPMS structures. Journal of Alloys and Compounds. 1038(20), 182675. https://doi.org/10.1016/j.jallcom.2025.182675
Syrlybayev, D., Yankin, A., Perveen, A., & Talamona, D. (2025). Effect of topology on the mechanical properties and energy absorption of annealed lightweight SLM AlSi10Mg lattice structures. International Journal of Lightweight Materials and Manufacture, 9(3), 300–313. https://doi.org/10.1016/j.ijlmm.2025.10.005
Coskun, M., Sagbas, B., Akyıldız, Y., & Odabaş, Ö. C. (2024). Investigation of the effect of process parameters and geometry-related variations on residual stress for aluminum 7050 alloy produced via laser powder bed fusion. Journal Of Materials Engineering And Performance, 33(15), 7577–7585.
Zhang, D., et al. (2018). Metal alloys for fusion-based additive manufacturing. Advanced Engineering Materials, 20(5), 1700952.
Çalışkan, C. İ., Khan, H. M., & Ural, M. M. (2023). Hybrid material usage in TPMS forms fabricated by additive manufacturing, comparison of mechanical strength of lattices produced with AlSi10Mg and 7050. Mater Today Commun, 36, 106872.
Elementum, E. A. 7050-Ram2 Materials Data Sheet. [Online]. Available: https://www.elementum3d.com/wp-content/uploads/2021/11/A7050-RAM2-Data-Sheets-2021-04-15.pdf
Kvvssn, V. (2025). Recent progress in additive manufacturing of 7XXX aluminum alloys. The International Journal of Advanced Manufacturing Technology, 137, 4353–4399. https://doi.org/10.1007/s00170-025-15415-z
Pakkanen, J., et al. (2016). Study of internal channel surface roughnesses manufactured by selective laser melting in aluminum and titanium alloys. Metallurgical and Materials Transactions A, 47(8), 3837–3844.
Calignano, F., Manfredi, D., Ambrosio, E. P., Iuliano, L., & Fino, P. (2013). Influence of process parameters on surface roughness of aluminum parts produced by DMLS. The International Journal of Advanced Manufacturing Technology, 67(9), 2743–2751.
Karmiris-Obratański, P., Georgakopoulos-Soares, I., Cichocki, K., Lisiecka-Graca, P., & Papazoglou, E. L. (2025). Compressive and energy absorption properties of titanium hybrid lattice structures for bioimplant applications fabricated via LPBF. Materials & Design, 254, Article 114045.
Babamiri, B. B., Mayeur, J. R., & Hazeli, K. (2022). Synchronous involvement of topology and microstructure to design additively manufactured lattice structures. Addit Manuf, 52, 102618. https://doi.org/10.1016/j.addma.2022.102618
Williamson, G. K., & Hall, W. H. (1953). X-ray line broadening from filed aluminium and wolfram. Acta Metallurgica, 1(1), 22–31.
Zhang, L., et al. (2020). Pseudo-ductile fracture of 3D printed alumina triply periodic minimal surface structures. Journal Of The European Ceramic Society, 40(2), 408–416.
Alagha, A. N., Sheikh-Ahmad, J. Y., Jarrar, F., Almaskari, F., & Abu Al-Rub, R. K. (2025). Energy absorption characteristics and deformation mechanism of TPMS and plate-lattice-filled thin aluminum tubes. Progress in Additive Manufacturing, 10(1), 969–982.
Lin, K., et al. (2021). Laser powder bed fusion of bio-inspired honeycomb structures: Effect of twist angle on compressive behaviors. Thin-Walled Structures, 159, Article 107252.
Zheng, P., Han, B., Liu, Z., Wang, Q., Wang, Z., & Zhang, Q. (2024). Multistable twist metastructures with enhanced collapsibility and multidimensional programmability. Addit Manuf, 95, 104550.
Zhang, L. W., Bian, T. J., Li, H., Yang, X. D., & Lei, C. (2025). Stress relaxation aging of 7050 aluminum alloy under elastic and plastic loadings: A perspective from the geometrically necessary dislocations. Journal of Alloys and Compounds, 1010, Article 177066.
Paupst, T., Pagliocca, N., Youssef, G., Kiel, T., Nath, P., & Koohbor, B. (2025). Experimental characterization of nonlinear mechanical behavior and auxeticity in 3D-printed rotating-square auxetics with spatially variable materials. Progress in Additive Manufacturing, 10, 10783–10799. https://doi.org/10.1007/s40964-025-01260-9
Dong, X., et al. (2024). “Heterostructured metallic structural materials: Research methods, properties, and future perspectives,.” Advanced Functional Materials, 34(51), Article 2410521.
Li, X., Lu, L., Li, J., Zhang, X., & Gao, H. (2020). Mechanical properties and deformation mechanisms of gradient nanostructured metals and alloys. Nat Rev Mater, 5(9), 706–723.