![\"Animation](\"https:\/\/www.newsbeep.com\/il\/wp-content\/uploads\/2026\/04\/doubledet.gif\")
<\/p>\nAnytime you try to learn something beyond your current understanding, it isn\u2019t as simple as pouring \u201cnew knowledge\u201d into an otherwise empty vessel. We come into any new endeavor with a pre-existing foundation: things we\u2019ve learned, been taught, or have put together for ourselves previously. When that new knowledge arrives, we inevitably attempt to integrate it into our pre-existing framework, and that isn\u2019t always a smooth process. Sometimes, our foundation is riddled with misconceptions, misunderstandings, or prior teaching that were outright wrong; we have to correct and \u201cunlearn\u201d those ways of thinking before we can progress. At other times, that knowledge arrives in an incomplete fashion, and so our brains fill-in-the-blanks with whatever makes sense to us: with a story that\u2019s often erroneous. <\/p>\n
Oftentimes, we recognize that we need an expert \u2014 someone possessing bona fide expert-level knowledge \u2014 to help us separate fiction from reality. Frustratingly, sometimes the sources we turn to for expertise can even lead us astray. That\u2019s happened to me, myself, many times along my journey as an astrophysicist, and that\u2019s what made Susannah Bodman\u2019s question to me so compelling, as she asked:<\/p>\n
\u201cHas [anything about your work] thrilled or frustrated you? Any misconceptions you found that you\u2019d like to clear up?\u201d<\/p>\n
While doing the work is often its own reward, misconceptions often abound: not just among the general public, but among the community of professionals researching physics and astronomy, including (although I am actively working to correct them) within myself. Let\u2019s get started.<\/p>\n
<\/p>\n
This animation of the double detonation scenario shows two white dwarfs in close orbit around one another. When material accumulates onto one member, it can cause a surface thermonuclear reaction, which can then propagate around the star until it triggers a core detonation. This scenario could be responsible for up to 100% of observed Type Ia supernovae, while the \u201cclassical\u201d picture of accretion onto a white dwarf that then exceeded the Chandrasekhar limit may well be responsible for 0% of Type Ia supernovae.\n<\/p>\n
Credit<\/a>: NASA\u2019s Goddard Space Flight Center Conceptual Image Lab\/Adriana Manrique Gutierrez (USRA)<\/p>\n Before we get into the biggest misconception of all, let\u2019s put forth some honorable mentions: about things that professionals have worked very hard to establish, but where many (both in the general public and in the professional field themselves) continue to cling to an outdated idea.<\/p>\n However, these big concepts usually take a while to get to, and many educational resources exist to combat them. That\u2019s why the biggest misconception is reserved for something far more basic in astronomy: how stars actually work.<\/p>\n This cutaway showcases the various regions of the surface and interior of the Sun, including the core, which is the only location where nuclear fusion occurs. As time goes on and hydrogen is consumed, the helium-containing region in the core expands and the maximum temperature increases, causing the Sun to \u201ccross the main sequence\u201d as its energy output increases. The balance between the inward-pulling gravity and the outward-pushing gas pressure, only slightly augmented by radiation pressure (and mostly in higher-mass stars), determines the size and stability of a star, while the core\u2019s size, temperature, and element abundance determines the rate and species of fusion inside.\n<\/p>\n Credit<\/a>: Wikimedia Commons\/KelvinSong<\/p>\n If you ask the average person \u2014 or even, perhaps embarrassingly, the average astronomer \u2014 an answer you\u2019re likely to hear about almost any question about \u201chow stars work\u201d is simply \u201cnuclear fusion.\u201d<\/p>\n Why do the stars shine?<\/p>\n What holds a star up against gravitational collapse?<\/p>\n What sets the temperature and luminosity of a star?<\/p>\n When do stars first \u201cturn on,\u201d officially?<\/p>\n Your instinct, even if you\u2019re an astronomer, is probably going to invoke nuclear fusion at some point. Indeed, the internet would seem to confirm this: \u201cnuclear fusion\u201d is mentioned in several related Wikipedia articles about this topic, and every LLM I\u2019ve asked about any of these questions always returns an answer that includes \u201cnuclear fusion\u201d playing a paramount role.<\/p>\n And it\u2019s true that nuclear fusion does indeed occur in the interiors of stars, and that it plays a major role as the dominant energy source within stars during the majority of their lifetime. But nuclear fusion isn\u2019t the entire story, and its role in stars has been greatly overemphasized for a historical reason: it was the last major piece of the puzzle for how stars work that was put into place, which was only recognized in the mid-20th century. In order to understand the actual answers to how stars shine, what holds them up, what sets their temperature and brightness, and when they actually turn on, let\u2019s go back in history to before we even were aware of the subatomic world, and try to imagine what an astronomer living in the late 19th century would put together about stars.<\/p>\n This diagram shows the workings of a heat engine within the Carnot cycle, where a heat source (red dotted curve) and a cold sink (blue dotted curve) first expand isothermally (from A to B), then expand adiabatically (from B to C), then compress isothermally (from C to D), and then compress adiabatically (from D to A). Note that during the adiabatic stages, where heat is not efficiently exchanged with the environment, the temperature changes: decreasing during expansion, but increasing during contraction. The contraction of gas clouds in space is an example of a largely adiabatic process.\n<\/p>\n Credit<\/a>: Cristian Quinzacara\/Wikimedia Commons<\/p>\n Although you may not realize it, astronomers and physicists were extraordinarily well-equipped to answer most questions about stars well over 100 years ago. Newtonian gravity<\/a> had been around since the 1600s. Lagrangian mechanics<\/a>, kinetic and potential energy, and the concept of \u201caction\u201d came along in the 1700s, as did the basics of electrostatics. Hamiltonian mechanics<\/a> arose in the 1800s, along with concepts for the heat engine<\/a>, thermodynamics<\/a>, and entropy<\/a>. Also in the 1800s, electricity and magnetism were unified<\/a>, we discovered the atom<\/a>, and we crafted and organized the periodic table of elements<\/a>. From biology and geology, in addition, we knew that the Earth was billions of years old, and that life had thrived upon our world for a very long time indeed.<\/p>\n But astronomers had been studying and classifying stars for millennia: usually organizing them by color and brightness. Stellar parallax<\/a> was first measured in the 1830s, giving us distances to (and separation distances between) the stars. And nebulae, with stars inside of them, had been known since the dawn of the telescope era<\/a>.<\/p>\n When it came to the question of \u201cwhat makes a star shine,\u201d there was an obvious explanation:<\/p>\n you begin with a cloud of gas,<\/p>\n that gas begins to contract owing to the force of gravity,<\/p>\n contraction converts gravitational potential energy into kinetic energy,<\/p>\n collisions between those internal atoms convert kinetic energy into thermal (heat) energy,<\/p>\n and that hot gas then exerts an outward pressure that balances the inward gravitational force.<\/p>\n Therefore, you wind up with stars: hot balls of gas that got their energy from gravitational contraction, and whose internally generated (gas) pressure makes an outward push, balancing the force of gravity.<\/p>\n This nebula in the Perseus molecular cloud, NGC 1333, is located only 960 light-years away here in our own Milky Way. While Hubble can only capture the light-blocking dust and heated gaseous material, JWST is spectacular at viewing an enormous number of obscured stars and protostars inside as well as the cooler material that is heated by the environmental conditions, which is invisible to Hubble. For the protostars themselves, they shine luminously despite getting much or even all of their energy from gravitational contraction, not nuclear fusion.<\/p>\n Credit<\/a>: NASA, ESA, STScI<\/p>\n Note, in particular, that there is no mention of nuclear fusion in this story. Without it, you might think, \u201cwell, this story isn\u2019t complete,\u201d but it turns out to still be largely correct. 19th century physics didn\u2019t cease to be true when we discovered quantum physics, relativity, subatomic particles, or nuclear fusion. Their discovery simply meant that there were additional reactions and effects that needed to be accounted for when modeling certain physical systems. Sure, some parts of the story for how reality works would need revision, but other parts would remain exactly the same. In this case, nuclear fusion will play a role in how stars work and shine, but the early stages of the story \u2014 the part we just told, from a 19th century perspective \u2014 are no different at all.<\/p>\n This still holds true when we begin asking questions about the temperature and luminosity (or intrinsic brightness) of a star as well. If you start with a given amount of mass, gravitational contraction will convert some of that (gravitational) potential energy into kinetic energy, and collisions convert that kinetic energy into heat energy. The more the mass contracts, the smaller it gets but also the hotter it gets: a thermodynamic consequence of adiabatic contraction<\/a>. And as the cloud of gas contracts to a given radius, it will emit energy (i.e., have a luminosity) at a rate that\u2019s proportional to its radius squared multiplied by its (surface) temperature to the fourth power:<\/p>\n L = 4\u03c0R\u00b2\u03c3T\u2074.<\/p>\n Again, this is not some novel, quantum-based formula, but rather a 19th century one: the Stefan-Boltzmann law<\/a>.<\/p>\n A variety of stars and stellar remnants are plotted on this color-magnitude diagram, with various star types and stellar systems annotated. Note that the color of a star is determined by its temperature (x-axis), but that the brightness of the star (y-axis) is much more dependent on the star\u2019s radius than on the color. The largest stars, the giants and supergiants, are the most luminous, as luminosity scales as radius to the fourth power.<\/p>\n Credit<\/a>: Starhuckster.com<\/p>\n Let\u2019s take stock of the various pieces of information we\u2019ve just listed off about the formation of stars, noting that once again, we haven\u2019t needed to bring up nuclear fusion at all in the story so far.<\/p>\n An initially massive, cold cloud of gas (normally around 50 K or so) begins contracting under its own gravity.<\/p>\n In many individual regions \u2014 but we can choose to focus on one in particular \u2014 a clump of matter begins growing relatively rapidly, drawing more and more of the surrounding matter onto it as contracts. (The more massive it is, the faster it grows and the faster it contracts.)<\/p>\n As the matter contracts, individual particles collide with one another, causing this massive clump to heat up as it contracts.<\/p>\n The more massive and concentrated this clump gets, the more heat gets trapped and the hotter it becomes: the density increases by a cumulative 18 orders of magnitude during this process.<\/p>\n However, as the clump becomes smaller, there\u2019s less surface area for that heat to escape through; the surface area of a sphere is how this clump allows heat to radiate away, and the smaller it is, the more slowly the heat escapes.<\/p>\n And inside this clump of matter, gravitation pulls things inward, but the heat of the moving particles provides an outward pressure (which is a force over an area), gas pressure, that works to counteract the effects of gravitation.<\/p>\n Now, add into that the law of radiation for any hot clump of matter that we\u2019d established: L = 4\u03c0R\u00b2\u03c3T\u2074.<\/p>\n This gives us a story for how protostars shine when they\u2019re forming. They begin emitting a lot of energy at relatively low temperatures, as they begin with large surface areas and modest (a few thousand K) temperatures. As they contract, their radius shrinks but their temperatures rise (which happens during adiabatic contraction<\/a>), leading their luminosities to first remain relatively constant, and then to decrease overall. The highest-mass protostars contract the fastest, while the lowest-mass ones take longer amounts of time to contract down to an equilibrium state: where the outward gas pressure at last balances the inward pull of gravitation.<\/p>\n A balloon will either expand or contract, changing its volume, so that its internal pressure (red lines) matches the external pressure (blue lines) at every point along its surface. The state shown, where the balloon is not expanding or contracting, is an illustration of pressure being in equilibrium. Inside a star, the pressure must be in equilibrium both at the surface and at every point within the star, or the star will change its mass distribution and\/or size to accommodate the difference.\n<\/p>\n Credit<\/a>: public domain\/E. Siegel<\/p>\n Once that balance is reached, that\u2019s where the star stops contracting. That\u2019s what sets the star\u2019s brightness (its luminosity), its size, and its temperature: where the gas pressure balances out the inward pull of gravitation.<\/p>\n So where, then, does nuclear fusion even come into the story? The answer is, \u201conly after everything we\u2019ve already discussed has occurred.\u201d We can look at it from two perspectives: historically or physically.<\/p>\n Historically, it came from attempting to understand the age of the Sun compared with the established (biological and geological; see point number 2 in this article<\/a>) age of the Earth. Our Sun has a certain total power output \u2014 a rate at which it emits energy over time \u2014 and there\u2019s only a finite amount of gravitational potential energy that the Sun possesses, even given its enormous mass. If you ask the question \u201chow long could the Sun shine at its current brightness if it were powered by this gravitational energy alone,\u201d the answer comes out to no more than about 40 million years. But the Earth (and life on it) was billions of years old, suggesting the need for a new energy source.<\/p>\n That source wasn\u2019t known to humanity in the 19th century, however. It wasn\u2019t until 1905 that Einstein put forth the idea that mass and energy were equivalent via E = mc\u00b2, and it wasn\u2019t until later that nuclear processes like fission and fusion were uncovered. It was only in 1930 that the neutrino was hypothesized as a product of nuclear reactions, and the first detection of neutrinos didn\u2019t occur until 1956. (Solar neutrino detection came soon after.) Still, \u201csomething beyond gravitation\u201d must have been at play to explain the longevity of the Sun\u2019s energy output.<\/p>\n The anatomy of the Sun, including the inner core, which is the only place where fusion occurs. Even at the incredible temperatures of 15 million K, the maximum achieved in the Sun, the Sun produces less energy-per-unit-volume than a typical human body. The Sun\u2019s volume, however, is large enough to contain over 10\u00b2\u2078 full-grown humans, which is why even a low rate of energy production can lead to such an astronomical total energy output. It takes approximately 50 million years for the Sun to go from having no fusion in its core, during the protostar phase, until it reaches this equilibrium state: where fusion provides 100% of the energy for the star, where gravitational contraction ceases.\n<\/p>\n Credit<\/a>: NASA\/Jenny Mottar<\/p>\n Physically, fusion only enters into the equation at all after the protostar has finished contracting: once this equilibrium state is reached. Only then do internal temperatures rise to very large values in the million-degree realm and up, which is the realm where fusion reactions begin to occur. Contrary to what you might expect, these reactions don\u2019t change the temperature, size, or brightness of the star, but rather change only what happens within the star\u2019s interior.<\/p>\n The first critical temperature threshold that gets crossed is the one that initiates deuterium (hydrogen nuclei with a proton and a neutron bound together) fusion: the fusion of deuterons with either protons or other deuterons. That produces negligible amounts of heat and pressure overall, and so the internal core continues to contract. Then another critical threshold is crossed, and lithium burning begins: where protons fuse onto lithium. Again, this produces negligible amounts of heat and pressure; the object is still just held up by gas pressure. <\/p>\n Then, when temperatures in the core rise to somewhere between 4 and 10 million K, the biggest critical threshold of all occurs: the initiation of hydrogen fusion through the proton-proton chain. It takes an object of at least 13 Jupiter masses (about 0.012% the mass of the Sun) to initiate deuterium fusion: the threshold for becoming a brown dwarf. It takes an object of approximately 60 Jupiter masses (about 0.057% the Sun\u2019s mass) to initiate lithium fusion, and then of approximately 65 Jupiter masses (about 0.061% of the Sun\u2019s mass) to initiate beryllium fusion. But it takes around 80 Jupiter masses (between 0.075-0.08% of the Sun\u2019s mass) to initiate hydrogen fusion<\/a>: the dominant process for energy production in most stars.<\/p>\n The most straightforward and lowest-energy version of the proton-proton chain, which produces helium-4 from initial hydrogen fuel. Note that only the fusion of deuterium and a proton produces helium from hydrogen; all other reactions either produce hydrogen or make helium from other isotopes of helium. This reaction set occurs in the interiors of all young, hydrogen-rich stars, regardless of mass.\n<\/p>\n Credit<\/a>: Sarang\/Wikimedia Commons<\/p>\n But achieving hydrogen fusion in the core does not mean your star has been officially \u201cborn\u201d just yet<\/a>; it is still a protostar when that begins. When nuclear fusion reactions begin, the protostar\u2019s core is small, the pressure produced by nuclear fusion is negligible, and the rate of energy output from nuclear fusion is small compared to the rate of energy radiated away by the protostar at its surface. The protostar doesn\u2019t contract, though, since it\u2019s still held up by gas pressure.<\/p>\n What happens is that its internal density and temperature profile changes, so that greater densities and temperatures concentrate in the core, leading to a more differentiated star with a photosphere on the outside, a radiative zone internally, and then a fusion zone in the core. As the core region grows larger and becomes centrally hotter, the rate of fusion increases. Eventually \u2014 after tens of thousands of years for the most massive stars, but after tens-of-millions of years for Sun-like stars \u2014 fusion becomes the dominant energy source for this object, and gravitational contraction, which drove the growth of the star\u2019s core even as its size and temperature remained constant, slows.<\/p>\n Only when fusion has grown sufficient to provide 100% of the energy needed to heat the internal gas of the star, which it must do to maintain the gas pressure that resists gravitational collapse, does the star \u201cfinish forming\u201d and can it be considered born. All told, if you take the time required for a protostar to contract and reach its size and temperature, which varies tremendously based on the protostar\u2019s mass, it takes about that much time again from when hydrogen fusion initiates to when hydrogen fusion supplies 100% of the star\u2019s total energy: tens of thousands of years for a 20 solar mass star, but millions to tens-of-millions of years for a Sun-like star.<\/p>\n From a contracting clump within a cloud of gas, protostars form as gravitational potential energy gets converted into thermal (heat) energy. Initially, protostars are cooler but more luminous than the stars that they will give rise to, and contract and heat up (but become smaller, with less surface area to radiate energy through) as they evolve. When they reach the curve entitled \u201czero age main sequence,\u201d that corresponds to equilibrium being reached as far as the star\u2019s size and temperature is concerned, but the official \u201cbirth\u201d of the star does not occur until fusion supplies all of the energy needed to supply the star\u2019s luminosity, ending gravitational contraction both at the surface and internally. The pathways for stars of different masses (relative to 1 solar mass) are indicated at various points along the curve.\n<\/p>\n Credit<\/a>: Lithopsian\/Wikimedia Commons<\/p>\n So nuclear fusion does play a major role in sustaining a star that begins to shine from its gravitational contraction, and it plays a major role in supplying the energy that enables stars to shine throughout their lifetime. Much later in a star\u2019s evolution, when it runs out of hydrogen fuel in its core and expands into a red giant, the core will contract and heat up further, and if it can initiate helium fusion in that core, the helium flash stage<\/a>, where helium fusion ignites, will provide a well-defined point in that star\u2019s evolution in ways that are detectable from the outside: in the evolution of that star\u2019s luminosity and radius. <\/p>\n But nuclear fusion doesn\u2019t explain why stars have the temperatures that they do. It doesn\u2019t explain why a star has the brightness it has. The \u201cswitch on\u201d of fusion doesn\u2019t have any immediate or obvious external consequences or signatures: not unless you\u2019ve got an ultra-sensitive neutrino telescope nearby. Radiation pressure from the fusion reactions doesn\u2019t hold the star up against further collapse (it contributes at the less-than 1% level in most stars, including the Sun!), but rather the star\u2019s internal gas pressure does that job. And the official \u201cbirth\u201d of a star happens when internal gravitational contraction ceases because fusion is providing 100% of the energy needed to match the star\u2019s total energy output at its surface.<\/p>\n The myth that \u201cnuclear fusion is responsible for everything you can measure about a star\u201d is no doubt the biggest misconception in all of astronomy, among both amateurs and professionals alike. Hopefully, after reading this, you\u2019ll understand the true story just a little bit better!<\/p>\n![\"cutaway](\"https:\/\/www.newsbeep.com\/il\/wp-content\/uploads\/2026\/04\/https___blogs-images.forbes.com_startswithabang_files_2017_09_Sun_poster.svg_.jpg\")
<\/p>\n![\"Pressure-volume](\"https:\/\/www.newsbeep.com\/il\/wp-content\/uploads\/2026\/04\/Carnot_cycle_pV_diagram.svg.png\")
<\/p>\n![\"A](\"https:\/\/www.newsbeep.com\/il\/wp-content\/uploads\/2026\/02\/heic2304a.jpg\")
<\/p>\n![\"Hertzsprung-Russell](\"https:\/\/www.newsbeep.com\/il\/wp-content\/uploads\/2026\/04\/diagrama-de-hertzsprung-russell.jpg\")
<\/p>\n![\"Yellow](\"https:\/\/www.newsbeep.com\/il\/wp-content\/uploads\/2026\/04\/pressure.jpg\")
<\/p>\n![\"\"](\"https:\/\/www.newsbeep.com\/il\/wp-content\/uploads\/2026\/04\/655928main_solar-anatomy-MOS-orig_full.jpg\")
<\/p>\n![\"proton](\"https:\/\/www.newsbeep.com\/il\/wp-content\/uploads\/2026\/04\/l.jpg\")
<\/p>\n![\"Hertzsprung-Russell](\"https:\/\/www.newsbeep.com\/il\/wp-content\/uploads\/2026\/04\/1777100372_167_Zams_and_tracks.png\")
<\/p>\n