{"id":597412,"date":"2026-08-27T08:38:11","date_gmt":"2026-08-27T08:38:11","guid":{"rendered":"https:\/\/www.newsbeep.com\/il\/597412\/"},"modified":"2026-08-27T08:38:11","modified_gmt":"2026-08-27T08:38:11","slug":"trak-in-markers-out-with-shining-3ds-new-einscan-trak-3d-scanner","status":"publish","type":"post","link":"https:\/\/www.newsbeep.com\/il\/597412\/","title":{"rendered":"Trak In, Markers Out With SHINING 3D\u2019s New EinScan Trak 3D Scanner"},"content":{"rendered":"

Anyone who\u2019s spent half an hour sticking reflective dots across a car hood before firing a single scan line knows the frustration. On a vintage Porsche awaiting restoration, those markers can\u2019t touch original paint. Museum artifacts prohibit them entirely. The markers aren\u2019t the point of the job, but until now, there\u2019s been no way around them.<\/p>\n

SHINING 3D<\/a> thinks that\u2019s ready to change. Their new EinScan Trak 3D Tracking System<\/a> is built around the idea that users shouldn\u2019t need to touch the object before scanning it, or need two separate rigs to capture both the big picture and the small details.<\/p>\n

The way it eliminates markers is surprisingly straightforward. The system has two components including an optical tracker, essentially a camera unit on a tripod, and a spherical scanner module which integrates a detachable handheld scanner that one moves across the object\u2019s surface.\u00a0<\/p>\n

The tracker watches the scanner, not the object, reading retroreflective markers built into the scanner housing to determine its position in space. Because the tracker is following the scanner and not the object, there\u2019s nothing to stick on the object itself.<\/p>\n

\"AA classic car scanned in two different modes. The spherical scanner is used in tracking mode on the exterior, while the detached handheld unit captures the interior, two modes can be merged into one project. Image via SHINING 3D.<\/p>\n

Marker-Free Scanning Without the Setup<\/p>\n

The need for separate equipment for large-area scanning and close-up detail gets a similarly practical solution. The spherical scanner holds a detachable handheld unit inside it. Pull it out, and users have an independent wireless handheld laser scanner that requires no tracker setup.\u00a0<\/p>\n

This is the mode for crawling into wheel wells, scanning deep cavities, or capturing small mechanical parts on a bench. Marker-free scanning still works here, though differently, using surface geometry for alignment. For uniform or featureless objects, traditional markers remain an option.<\/p>\n

What makes this genuinely useful in practice is that both modes feed into a single project file. Scan a car body in tracking mode, detach the handheld unit, capture the intake manifold in detail, and merge everything without switching software or re-registering datasets. Large-object scanning has traditionally meant committing to one workflow and living with its limitations, so the ability to move between scales inside a single project group is where the real time savings live.<\/p>\n

\"3D3D scanning a yacht deck. Image via SHINING 3D.<\/p>\n

The laser system reinforces that versatility with three projection modes. Crossed laser lines, 19 pairs, cover surface area fast and serve as the default for broad scanning. Seven parallel laser lines trade speed for sharper edge definition on mechanical parts where tolerances matter.\u00a0<\/p>\n

A single laser line reaches into deep holes, narrow channels, and internal structures. That last mode sounds minor until users are staring at a mesh with a perfectly captured exterior and a blank void where the exhaust port should be.<\/p>\n

Speed and resolution back up those modes with numbers that matter for professional work. The scanner captures up to 2,630,000 points per second at resolutions up to 0.05mm. During scanning, users can switch between resolution settings and apply Local Resolution to specific areas that require greater detail, allowing them to balance scanning speed and detail within the same project. A 5MP texture camera captures color alongside geometry, which is worth noting because optical tracking systems have historically treated color as an afterthought.\u00a0<\/p>\n

For reverse engineering, color is irrelevant. For cultural heritage, museum digitization, or AR\/VR asset creation, it\u2019s essential.<\/p>\n

Speed and Resolution for Professional Work<\/p>\n

All of this runs wirelessly, which is where the field-readiness argument comes together. Wi-Fi 6 through a dedicated local network, auto-pairing at startup, with a working range of four meters from the tracker.\u00a0<\/p>\n

Battery life is rated at five and a half hours in tracking mode and three and a half in handheld mode, with hot-swappable batteries so users never shut down to swap. The body is carbon fiber, built for transport.<\/p>\n

The four-meter wireless range could sound limiting for large objects, but a feature called Hybrid Leapfrog addresses that directly. Users reposition the tracker mid-scan without losing tracking continuity, each station requires four markers for identification to establish the next position and maintain scan continuity.<\/p>\n

The system is also rated for outdoor use up to 110,000 lux and handles difficult surfaces including gloss black, bare metal, and reflective finishes without spray coating.<\/p>\n

\"ScanScan data flows into SHINING 3D\u2019s companion software. Image via SHINING 3D.<\/p>\n

On the software side, two companion packages round out the workflow. EXMeasure handles dimensional measurement, covering GD&T checks, flatness and parallelism measurements, caliper simulation, and color map comparisons.\u00a0<\/p>\n

EXModel handles reverse engineering, from mesh cleanup and auto-surfacing to CAD-ready geometry export, and requires a separate purchase. Purchasing EinScan Trak includes a one-year EXMeasure license.<\/p>\n

So who actually needs this? The people running two or three separate setups to cover large-area capture and fine-detail scanning, burning prep time on markers between every job. Automotive aftermarket shops digitizing body panels and assemblies.\u00a0<\/p>\n

Heritage conservation teams who can\u2019t modify what they\u2019re scanning. Engineering firms doing reverse engineering in the field. For users focused exclusively on small-part scanning, a single handheld scanner may already be sufficient.<\/p>\n

Marker-free tracking, a detachable handheld scanner, three laser modes, and wireless operation in a single carbon fiber system. For professionals tired of prepping surfaces before scanning them and hauling separate rigs for different scales of work, the EinScan Trak is SHINING 3D\u2019s answer to both problems at once.<\/p>\n

Technical specifications and pricing<\/p>\n

For pricing details, interested readers can contact SHINING 3D<\/a>.<\/p>\n

\"TechnicalTechnical specifications of EinScan Trak. Image via SHINING 3D.<\/p>\n

3D Printing Industry is inviting speakers for its 2026 Additive Manufacturing Applications (AMA) series, covering Energy, Healthcare, Automotive and Mobility, Aerospace, Space and Defense, and Software. Each online event focuses on real production deployments, qualification, and supply chain integration. Practitioners interested in contributing can\u00a0complete the call for speakers form here<\/a>.<\/p>\n

To stay up to date with the latest 3D printing news, don\u2019t forget to subscribe to the\u00a03D Printing Industry newsletter<\/a>\u00a0or follow us on\u00a0LinkedIn<\/a>.<\/p>\n

Explore the full\u00a0Future of 3D Printing<\/a>\u00a0and\u00a0Executive Survey<\/a>\u00a0series from 3D Printing Industry, featuring perspectives from CEOs, engineers, and industry leaders on the\u00a0industrialization of additive manufacturing<\/a>,\u00a03D printing industry trends 2026<\/a>, qualification, supply chains, and\u00a0additive manufacturing industry analysis<\/a>.<\/p>\n

Featured image shows the SHINING 3D EinScan Trak 3D Scanner. Image via SHINING 3D.<\/p>\n","protected":false},"excerpt":{"rendered":"Anyone who\u2019s spent half an hour sticking reflective dots across a car hood before firing a single scan…\n","protected":false},"author":2,"featured_media":597413,"comment_status":"","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[6],"tags":[85,46,270199,125],"class_list":["post-597412","post","type-post","status-publish","format-standard","has-post-thumbnail","category-technology","tag-il","tag-israel","tag-shining-3d","tag-technology"],"_links":{"self":[{"href":"https:\/\/www.newsbeep.com\/il\/wp-json\/wp\/v2\/posts\/597412","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.newsbeep.com\/il\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.newsbeep.com\/il\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.newsbeep.com\/il\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/www.newsbeep.com\/il\/wp-json\/wp\/v2\/comments?post=597412"}],"version-history":[{"count":0,"href":"https:\/\/www.newsbeep.com\/il\/wp-json\/wp\/v2\/posts\/597412\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.newsbeep.com\/il\/wp-json\/wp\/v2\/media\/597413"}],"wp:attachment":[{"href":"https:\/\/www.newsbeep.com\/il\/wp-json\/wp\/v2\/media?parent=597412"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.newsbeep.com\/il\/wp-json\/wp\/v2\/categories?post=597412"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.newsbeep.com\/il\/wp-json\/wp\/v2\/tags?post=597412"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}