After a decade of building high-throughput Multi Jet Fusion systems for service bureaus and large manufacturers (the HP Jet Fusion 5200 and 5600 series), the team \u201cdidn\u2019t want to just build a smaller machine,\u201d but they also \u201cwanted to solve the problems that actually hold you back.\u201d The feedback that guided the project was consistent. \u201cYou were not looking for more 3D printing. You just wanted parts. Strong parts, easy and fast.\u201d<\/p>\n
That distinction shaped most of the design decisions in the MJF 1200, which was announced earlier this year.<\/p>\n
Designed Around the Workflow<\/p>\n
The HP MJF 1200 3D Printer uses the same core Multi Jet Fusion process as HP\u2019s production systems. Powder deposition, fusing and detailing agents applied via thermal inkjet, infrared energy fusing each layer simultaneously across the full build area. A 12-liter build completes in under 12 hours.\u00a0<\/p>\n
But the development effort focused heavily on what happens before and after the print. Liz Storstrom, the product manager, was direct about it. \u201cEvery person we spoke to asked for an easy, efficient workflow with minimal powder interaction. No one wants to stand around cleaning powder off parts, and now you don\u2019t have to.\u201d<\/p>\n
The system\u2019s Material Management System automates part unpacking through vibration, recovers excess powder, and blends fresh and recycled material at up to an 80\/20 ratio. The full cycle follows a guided interface on the front panel.\u00a0<\/p>\n
\u201cEven if it\u2019s your first print,\u201d Storstrom said, \u201cyou can confidently follow the front panels and know you\u2019re doing it right.\u201d A dual-camera system allows remote build monitoring, and an optional pay-as-you-go model handles consumable replenishment automatically.<\/p>\n
The full solution, including the printer, Material Management System, Natural Cooling Unit, and Magics Print for HP build-preparation software from Materialise, comes in under $60,000. That figure covering the complete ecosystem rather than just the printer is worth noting in a category where ancillary hardware and software can substantially inflate real cost of ownership.<\/p>\n
![\"The](\"https:\/\/www.newsbeep.com\/nz\/wp-content\/uploads\/2026\/08\/MJF1200_MMS_printer_material-1024x576.png\")
The HP MJF 1200 3D Printer (right) and Material Management System (left) installed in a design studio workspace. Photo via HP.<\/p>\n
Beyond the Spec Sheet<\/p>\n
Whether all of this translates from spec sheet to studio floor is something HP put to outside teams months before the public announcement. One of the alpha testers for this system was the Barcelona-based agency Anima Design<\/a>.\u00a0<\/p>\n Their prototyping department already relied on MJF for final-stage validation. Eric Paris, a design prototyper at the studio, explained the hierarchy. \u201cWhen we need really good surfaces or finishings or if we want to check the tolerances, we use Multi Jet Fusion because it\u2019s the best.\u201d<\/p>\n What changed with the 1200 was where that step happened, moving from outsourced to in-house and collapsing turnaround from days to hours. Yoel Cruz, who manages manufacturing and prototyping at Anima, went further, holding up a fully 3D printed violin. \u201cWe have a technology that gives us the chance not only to iterate and make different parts but also manufacture final parts.\u201d<\/p>\n The medical field offers a different and arguably more consequential test of that in-house capability. LualdiLabs<\/a>, HP\u2019s first beta tester for the MJF 1200, is producing personalized medical devices closer to the point of treatment, where the distance between manufacturing and end use is measured in patient outcomes rather than shipping days. If the platform holds up under that level of precision and regulatory scrutiny, it validates the technology in ways no spec sheet can.<\/p>\n One technical point that\u2019s easy to overlook but operationally significant. The MJF 1200 runs the same agents, fusion process, and PA 12 material platform as HP\u2019s production-scale systems. Parts from the 1200 are mechanically consistent with parts from a 5200 or 5600.\u00a0<\/p>\n A team can prototype in-house and shift volume production to any provider in HP\u2019s global MJF network without requalifying. \u201cYou\u2019re never alone,\u201d Storstrom said. \u201cWe have a worldwide ecosystem of hundreds of MJF parts providers that you can rely on.\u201d<\/p>\n The full HP MJF 1200 3D Printer Solution is expected in early 2027, with an Early Access Program currently open at no upfront cost. The technology itself has a decade of production history behind it. What\u2019s changed is that teams who have been outsourcing it can now consider owning it.<\/p>\n More information and Early Access reservations are available here<\/a>.<\/p>\n 3D Printing Industry is inviting speakers for its 2026 Additive Manufacturing Applications (AMA) series, covering Energy, Healthcare, Automotive and Mobility, Aerospace, Space and Defense, and Software. Each online event focuses on real production deployments, qualification, and supply chain integration. Practitioners interested in contributing can\u00a0complete the call for speakers form here<\/a>.<\/p>\n To stay up to date with the latest 3D printing news, don\u2019t forget to subscribe to the\u00a03D Printing Industry newsletter<\/a>\u00a0or follow us on\u00a0LinkedIn<\/a>.<\/p>\n Explore the full\u00a0Future of 3D Printing<\/a>\u00a0and\u00a0Executive Survey<\/a>\u00a0series from 3D Printing Industry, featuring perspectives from CEOs, engineers, and industry leaders on the\u00a0industrialization of additive manufacturing<\/a>,\u00a03D printing industry trends 2026<\/a>, qualification, supply chains, and\u00a0additive manufacturing industry analysis<\/a>.<\/p>\n Featured image shows front view of the HP MJF 1200 3D Printer with material tank attached. Image via HP.<\/p>\n","protected":false},"excerpt":{"rendered":"How many engineering decisions have been delayed by three to five business days because a functional prototype was…\n","protected":false},"author":2,"featured_media":578612,"comment_status":"","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[6],"tags":[285008,285009,285010,8337,285011,285012,111,139,69,145,285013],"class_list":["post-578611","post","type-post","status-publish","format-standard","has-post-thumbnail","category-technology","tag-anima-design","tag-clara-remacha-corbalan","tag-eric-paris","tag-hp","tag-liz-storstrom","tag-lualdilabs","tag-new-zealand","tag-newzealand","tag-nz","tag-technology","tag-yoel-cruz"],"_links":{"self":[{"href":"https:\/\/www.newsbeep.com\/nz\/wp-json\/wp\/v2\/posts\/578611","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.newsbeep.com\/nz\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.newsbeep.com\/nz\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.newsbeep.com\/nz\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/www.newsbeep.com\/nz\/wp-json\/wp\/v2\/comments?post=578611"}],"version-history":[{"count":0,"href":"https:\/\/www.newsbeep.com\/nz\/wp-json\/wp\/v2\/posts\/578611\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.newsbeep.com\/nz\/wp-json\/wp\/v2\/media\/578612"}],"wp:attachment":[{"href":"https:\/\/www.newsbeep.com\/nz\/wp-json\/wp\/v2\/media?parent=578611"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.newsbeep.com\/nz\/wp-json\/wp\/v2\/categories?post=578611"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.newsbeep.com\/nz\/wp-json\/wp\/v2\/tags?post=578611"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}![\"Build](\"https:\/\/www.newsbeep.com\/nz\/wp-content\/uploads\/2026\/08\/HPMJF1200_Build_prep-1024x576.png\")
Build preparation in Magics Print for HP, showing multiple parts nested within the MJF 1200\u2019s 12-liter build volume. Image via HP.<\/p>\n