ASUS’s latest NVIDIA GeForce RTX GPU has just launched into its creator- and aesthetics-focused ProArt series as the ProArt RTX 5090 OC Edition, which ASUS says is designed for small form factor systems. The ASUS ProArt GeForce RTX 5090 OC Edition features the typical, clean, black and gold design with a 2.5-slot shroud and dual-fan design, and it features a “wood patterned laminate trim” along the curved edge facing the exterior of the PC case. The GPU is cooled by a vapor chamber with two heat sinks for flow-through cooling with hot air exhausting via vents in both the side and back of the GPU. The GPU itself is based on the NVIDIA Founder’s Edition PCB, meaning uses the same angled 12V-2×6 power connector as NVIDIA’s design and complies with the GeForce SFF-Ready specification. US pricing has not yet been revealed, but Geizhals has the ProArt RTX 5090 OC Edition listed at €3,505.89 ($4,115.21 converted).
ASUS claims that the cooler’s design improves cooling efficiency by 11% and reduces the overall size of the card by as much as 27% compared to similar cards without the double flow-through design. It is also cooled by liquid metal, and the PCB is protected by a conformal coating, which helps in the event of leaking liquid metal and protects against high humidity environments. According to the GPU’s spec sheet, the ProArt RTX 5090 OC Edition features a single HDMI 2.1b port, dual DisplayPort 2.1b ports, and a USB Type-C port, for a total of four displays. The GPU itself is clocked at 2482 MHz, with an OC Mode that boosts that to 2512 MHz. There’s also a hardware switch on the GPU shroud that switches between Performance and Quiet modes—both modes feature the same power and frequency targets, but Quiet mode has a less aggressive fan curve, to keep noise down. Obviously, it is also compatible with ASUS GPU Tweak III, which allows users to tweak their own fan curves, power targets, and frequency in a GUI.