![\"PHAT-Sat](\"https:\/\/www.newsbeep.com\/us\/wp-content\/uploads\/2026\/05\/1778678190628.jpeg\")
PHAT-Sat is one of two missions that the Wildcat Space Program is working to design and launch by 2030. K-State photo<\/p>\nPHAT-Sat is one of two missions that the Wildcat Space Program is working to design and launch by 2030. K-State photo<\/p>\n
By RAFAEL GARCIA<\/a> MANHATTAN \u2014 Take a look at the night sky and for a moment notice the faint streaks of sunlight reflecting off satellites overhead.<\/p>\n Each glimmers for just a moment, but behind every passing point of light are hundreds of people and thousands of hours spent designing, building and launching these feats of human ingenuity.<\/p>\n At Kansas State University, students in the\u00a0Wildcat Space Program<\/a>\u00a0are learning exactly what it takes to leave their own mark on the sky \u2014 in part by building a satellite themselves.<\/p>\n In Paul Snider\u2019s CubeSat class in the\u00a0Carl R. Ice College of Engineering<\/a>, K-State students are getting hands-on experience with the various complexities of satellite design, fabrication, research and launch.<\/p>\n They budget power draws, calculate orbital paths and balance risk across hundreds of interactions between systems \u2014 all while learning how to work across disciplines to build something better than any one department could by itself.<\/p>\n Putting the pie in the sky<\/p>\n The concept for the class came when Snider, a 1992 K-State alumnus, returned to the Carl R. Ice College of Engineering in 2022\u00a0to serve as a professor of practice<\/a>\u00a0and share some of his expertise after a long career in the aerospace and satellite industry.<\/p>\n With an eye toward increasing interdisciplinary experiences for students, Snider developed classes that would have students conceptualize potential Low Earth Orbit satellite missions using the CubeSat form factor.<\/p>\n A CubeSat\u00a0is a type of standardized nanosatellite<\/a>\u00a0that offers a lower-cost option for businesses, research institutions and schools to launch research projects into space. Configurable for up to 12 units, a single CubeSat unit is 10 x 10 x 10 centimeters, allowing dozens to be launched at a time on a single rocket.<\/p>\n Starting with a group of freshman honors students, Snider helped them develop ideas for CubeSat missions that students in the college’s senior capstone could further refine.<\/p>\n “When we started this project in fall 2024, some of our students gave us some ‘pie-in-the-sky’ ideas for what would be conceivable for our CubeSat to do,” Snider said. “We ended up with roughly 50 different mission ideas, ranging from going to the moon or Mars to things orbiting around the Earth.<\/p>\n “Since then, Snider has further developed the project into a technical elective open to students in various engineering disciplines. Each of the college’s\u00a0mechanical and nuclear<\/a>,\u00a0electrical<\/a>,\u00a0industrial<\/a>\u00a0and\u00a0chemical<\/a>\u00a0engineering departments, as well as\u00a0computer science<\/a>, are represented in the class. Students from\u00a0K-State Salina<\/a>\u00a0also attend classes remotely and contribute insights from their fields of study in uncrewed aircraft systems and related engineering principles.<\/p>\n “The idea is that this cross-disciplinary design and interaction is what we want to foster,” Snider said. “That\u2019s what it\u2019s like working in the real engineering world \u2014 you have to work across disciplines to build a satellite.<\/p>\n “And in working across disciplines, the students have a chance to teach and learn from each other, said Nalen Rangarajan, senior in computer science and math,\u00a0Olathe.<\/p>\n “You\u2019re all contributing to this one thing, and you\u2019re learning as you go,” Rangarajan said. “I didn\u2019t know a ton about space going in. I had been involved in some research in the math department here, and I was aware of space and confident in my computer science and math skills, but this is really about going outside your comfort zone.”<\/p>\n Ad astra\u2026<\/p>\n Out of that process came\u00a0two viable and feasible missions<\/a>: PHAT-Sat, or the Precision Hyperspectral Agricultural Tracking Satellite, and NuKAT, or the Neutron Detector: K-State Analysis Tool.<\/p>\n By 2030, the PHAT-Sat project plans to launch a three-unit CubeSat equipped with advanced, hyperspectral cameras that can point toward Kansas and the surrounding region and help detect crop health anomalies. Farmers and drought managers could then analyze that satellite imagery to implement precision agriculture techniques for better irrigation, resource management and sustainability.<\/p>\n In the meantime, the class decided to formulate a “pathfinder” mission to PHAT-Sat by spinning off what had previously been a smaller, secondary payload into NuKAT, a two-unit satellite tentatively set to launch in 2027.<\/p>\n NuKAT will help validate the\u00a0Microstructured Semiconductor Neutron Detector<\/a>\u00a0\u2014 produced by the K-State-affiliated\u00a0Radiation Detection Technologies<\/a>\u00a0Inc. \u2014 as a viable sensor for use in the various radiation environments found in space, said Colby Johnston, principal investigator for the NuKAT mission.<\/p>\n “At its core, we’re trying to use this new detector technology and verify it works,” said Johnston, senior in mechanical and nuclear engineering,\u00a0Shawnee. “But we\u2019re also asking: how can we get specific day-to-day data in space on a less costly and smaller scale than a giant satellite? By making it more student-oriented and open-source, other universities \u2014 and even businesses and the government \u2014 could pull from this mission.<\/p>\n “The goal is to get smaller, more power-efficient and more radiation-resistant technologies in space,” Johnston said \u2014 and maybe even on bigger missions.<\/p>\n “If we can verify and space-qualify it now, that kind of technology could even become a way to cut down on bulk on a mission to the Moon or a rover on Mars,” the senior said.<\/p>\n \u2026Per aspera<\/p>\n For any part of that principal mission to have success, though, a whole host of supporting systems and software on the miniature satellite have to work in near-perfect coordination.<\/p>\n Take communications, for example. The mission provides little useful information if the radiation detector can’t move its data from sensor to computer to antenna to ground station \u2014\u00a0also planned for and developed by K-State students.<\/a><\/p>\n Where does the antenna need to go on the CubeSat? How big can it be? How powerful does it have to be? How do you balance power so that each system receives the necessary amount? What communications band works best for the mission? How often can the satellite communicate its data? What happens if neutrons flip a bit on the satellite’s computer and change the message? How long can the research mission remain viable if a data transmission is missed because of cloudy weather?<\/p>\n That\u2019s just one subsystem, and they\u2019re but a sample of the hundreds of interactions the students have to account for.<\/p>\n Any number of solutions can solve any individual question. The challenge is finding solutions that solve as many questions as possible without introducing new issues, while also minimizing risk to the lowest acceptable level.<\/p>\n But in the students’ eyes, each challenge is one that can be overcome with proper planning and design.<\/p>\n “A satellite is a very critical system,” said Logan Hayward, senior in computer science,\u00a0Oberlin. “You can modify software while it\u2019s in space, but for the most part, once you ship it, you have to hope and pray it works. It’s a stressful spot to be in, but it’s been an incredibly fun challenge to work on alongside my classmates, and I’ve learned more from this process than any other class I’ve had at K\u2011State.”<\/p>\n Eyes on new horizons<\/p>\n With the launch of NuKAT still at least a year away, the CubeSat students \u2014 through their connected Wildcat Space Program student organization \u2014\u00a0are still fundraising for the first mission<\/a>.<\/p>\n It is expected to cost around $200,000 between launch and equipment costs, with some support from the college and vendors who are helping provide equipment at cost.<\/p>\n “The funding part is also big \u2014 knowing what mission you have for the stakeholders that would actually care and be able to fund it,” said Braden Adams, senior in computer science,\u00a0Abilene. “Learning about some of those higher levels of program work has also been interesting. We could design the best satellite ever, but if we don\u2019t have the funding to actually build it, then it doesn\u2019t matter.”<\/p>\n Since becoming involved in the class, several students like Bailey Walke,\u00a0West Des Moines, Iowa,\u00a0have shifted their career ambitions and have sought out internships and careers in the aerospace and satellite design industry.<\/p>\n
K-State Communications<\/p>\n![\"Logan](\"https:\/\/www.newsbeep.com\/us\/wp-content\/uploads\/2026\/05\/1778679038030.jpeg\")
Logan Hayward, senior in computer science, Oberlin. K-State photo<\/p>\n